PDA

View Full Version : Forsale: Plasma Ignition Coils - $400 ALMOST NEW!


bimmerZ5
11-03-2005, 09:33 PM
<table border=0 width=900 height=500>
<tr>
<td valign=top width=400>
<!-- item description --><p><h3>Ignition Solutions Plasma Coil-over plugs PDC-5012-01</h3>
<!-- BMW part number --><p><b>P/N:</b> PDC-5012-01
<!-- Condition --><p><b>Condition:</b> Excellent! Only used for about 100 miles on an E36 M3.
<!-- Est. Dealer Cost --><p><b>Retail Price:</b> $775.00
<!-- My Price --><p><b>Price:</b> $400 + shipping charges (or local pickup)
<p>Here's the story:<br>
I bought these for my 2003 530i (E39) w/ M54 3.0L motor. I got them used from a E36 M3 owner who only used them for 100 miles but decided to do something else with his car.<br><br>
These work on all M52 motors (2.3, 2.8), S52 and most M54 motors (2.5,3.0). I was going to install these in my late 2003 M54 3.0L, but apparently, in late 2003, BMW changed the ignition coils to the newer type that is used in the S54 motors. Ironically, i also just got a recall notice from BMW for the stock ignition coils in my car.<br><br>
If you want to check for sure, take off your engine cover and see if your plugs are held on by bolts or are they "twist off". If each one is held on by two hex bolts and you have one of the motors listed above, it should work. If there are no bolts and they are simply "snapped" in, then it won't fit.
<td valign=top width=500>
Click image for larger view.<br>
<a href=http://www.jlbond.com/personal/images/IgnitionSolutionsPlasmaCoils2.jpg target=_new>
<img src=http://www.jlbond.com/personal/images/IgnitionSolutionsPlasmaCoils.jpg width=500 border=0></a>

</tr>
</table>

Boile
11-03-2005, 10:03 PM
$400+ for coil plugs? What do they do for me? :dunno:

bimmerZ5
11-03-2005, 10:08 PM
$400+ for coil plugs? What do they do for me? :dunno:
You can read more about it on the manufacturer's website:
http://www.ignitionsolutions.com/productsDirect.asp

application on a 330i:

http://www.ignitionsolutions.com/technology/dyno/2001BMW330Ci/dynoGraph.pdf

jnusser
11-14-2005, 10:41 AM
so looking at the dyno graphs....

lots of $$$ for 5hp & 1 ft-lb of torque? :confused:

bump for a good deal, but why would anyone buy at retail?

Pinecone
11-14-2005, 05:59 PM
Some other htread around about these that links to several threads where the do NOTHING. Or put it this way, the local hot ITS BMW race cars don't run them, so they must not do too much, as they will run ANYTHING that will actually produce more power.

OLLINATOR
11-16-2008, 09:03 PM
Hey how you doing you still have the coils? let me know thanx...

Ollin

bimmerZ5
12-16-2008, 07:50 PM
Hey how you doing you still have the coils? let me know thanx...

Ollin

:bigpimp: ha ha.. that was over 3 yrs ago... i sold the coils to an M3 owner who wanted them for his Turbo setup...