Rooz
03-09-2006, 10:07 PM
Made entirely of Polypropylene, fits better than OE, weigh less and is MUCH stronger. Included is the mesh and molding, lip is integrated into the bumper, price of only $360 shipped
What is Polypropylene or PP?
Polypropylene (PP) is a linear hydrocarbon polymer, expressed as CnH2n. PP, like polyethylene (see HDPE, L/LLDPE) and polybutene (PB), is a polyolefin or saturated polymer.
Polypropylene is one of those most versatile polymers available with applications, both as a plastic and as a fibre, in virtually all of the plastics end-use markets.
Automotive use
In the automotive sector PP is utilized as a monomaterial solution for automotive interiors. The monomaterial dashboard is becoming increasingly achievable, PP film cushioning, film skins, and powder slush molding and even blow molded parts with integral PP textile covers are emerging.
Bumpers, cladding, and exterior trim are also available manufactured from polypropylene. Polypropylene developed for such applications provides low coefficient of linear thermal expansion and specific gravity, high chemical resistance and good weatherability, processability and impact/stiffness balance. Improvements with colour-at-the-press and pre-coloured PP have also reduced or eliminated the need for painting in some applications.
PP does not present stress-cracking problems and offers excellent electrical and chemical resistance at higher temperatures.
http://img146.imageshack.us/img146/7060/fbm3e369297339903a0ml.jpg
PM ME IF YOU WANT TO TAKE THIS OFF MY HANDS!!!!
What is Polypropylene or PP?
Polypropylene (PP) is a linear hydrocarbon polymer, expressed as CnH2n. PP, like polyethylene (see HDPE, L/LLDPE) and polybutene (PB), is a polyolefin or saturated polymer.
Polypropylene is one of those most versatile polymers available with applications, both as a plastic and as a fibre, in virtually all of the plastics end-use markets.
Automotive use
In the automotive sector PP is utilized as a monomaterial solution for automotive interiors. The monomaterial dashboard is becoming increasingly achievable, PP film cushioning, film skins, and powder slush molding and even blow molded parts with integral PP textile covers are emerging.
Bumpers, cladding, and exterior trim are also available manufactured from polypropylene. Polypropylene developed for such applications provides low coefficient of linear thermal expansion and specific gravity, high chemical resistance and good weatherability, processability and impact/stiffness balance. Improvements with colour-at-the-press and pre-coloured PP have also reduced or eliminated the need for painting in some applications.
PP does not present stress-cracking problems and offers excellent electrical and chemical resistance at higher temperatures.
http://img146.imageshack.us/img146/7060/fbm3e369297339903a0ml.jpg
PM ME IF YOU WANT TO TAKE THIS OFF MY HANDS!!!!
