PDA

View Full Version : Question on a dinan vortech based supercharger


MikeHsu
05-13-2006, 06:05 PM
I just sent Dinan an email about this, but have not gotten a replied yet. A e36 m3 dinan supercharger can fit an 2000 M roadster. Everything can fit but the intake tubes. Can this part be fabricated? What exactly does this consist of, tubes and clamps? A picture would be great.

ECU, can they both be interchanged? Thanks

Michael C. Hsu

firedwg1
05-13-2006, 07:45 PM
I just sent Dinan an email about this, but have not gotten a replied yet. A e36 m3 dinan supercharger can fit an 2000 M roadster. Everything can fit but the intake tubes. Can this part be fabricated? What exactly does this consist of, tubes and clamps? A picture would be great.

ECU, can they both be interchanged? Thanks

Michael C. Hsu


I think Dinan will give you an the best answer//// you can post it here when they email you back. You question posted doesnt provide enough information to provide a good answer.

E36 Kit should fit from what I have seen with exception to CAI, and radiator hoses, software maybe different depending on ECU.

MikeHsu
05-16-2006, 02:45 PM
I just got off the phone from Dinan, and he said it wont fit and many components need to be changed from bracket to wiring harness. Wiring harness? Is he correct?

joema
05-17-2006, 03:43 AM
Mike there are several supercharger options for an e36 M3 (not just Dinan). Whether these will fit a 2000 M roadster, I don't know -- you'd have to inquire of each mfg. For pure performance, the AA twin-screw system would probably be best.

http://www.aatuning.com/supercharger/tse36m3/main.php
http://www.aatuning.com/supercharger/e36m3/main.php
http://www.vf-engineering.com/index.php?v=/cat-bmw.php
http://www.koperformance.com/BMW/turbo_superchargers/index.htm

firedwg1
05-19-2006, 01:50 PM
I just got off the phone from Dinan, and he said it wont fit and many components need to be changed from bracket to wiring harness. Wiring harness? Is he correct?


From my observations E36bracket should be the same"E36 is a E36" I cannot speak for dinan but VFE uses the same brackets for all E36's... Wiring harnes... dont know... CAI Yes will need to be changed to make it fit...

Why dont you ask your dinan rep how much it would cost to purchase the needed parts then you can decide if its worth the trouble.

Maybe you should ask Randy Forbes. I'm sure he knows

intvic18t
07-24-2006, 09:48 PM
just to let know this will fit. e36 kit will fit a e36 mike got his to fit his m roadster and i bought a kit from a 98 z3 and just got done putting it on my 94 325 and i reused the intake piping even!