PDA

View Full Version : Help to find correct pressure


bimmerjag
06-06-2006, 05:31 PM
I have a 528iT with 235-45-17 Fuzion tires. I bought the car a week ago but I do not know the correct pressure. I looked in theri site and no info. Maybe somebody can help? I live in Miami-sea level- 1-2 persons. Thanks :thumbup:

Gary@Tirerack
06-07-2006, 05:47 AM
Tire pressures when using OE tire sizes do not vary by tire brand. Use the inflation pressure listed for this size in your vehicles owners manual or tire placard (normally on the gas flap).

It is likely somewhere around 33psi .

bimmerjag
06-07-2006, 08:53 AM
Gary thanks, I will look it up:thumbup: Also, if I could get your input on this if it is not a proble, I was looking at the Bridgestone RE050A as possible replacement of the Fuzions that I currently have. The reason for the change is that I have a vibration and they are a little loud, would the Bridgestones cure that? Again, I appreciate your feedbakc:thumbup:

Gary@Tirerack
06-07-2006, 09:34 AM
If you're replacing all four tires this would be a nice upgrade for wet/dry grip and handling. The Re050A should not have vibration issues, but I would not expect much of an improvement in noise over the Zri either. For more of a comfort/quiet riding tire in that max performance category check out the Conti Contact2.