Ebay turbo manifold for 325is [Archive] - Bimmerfest - BMW Forums

: Ebay turbo manifold for 325is

06-26-2006, 03:55 PM
What do you guys think about it? Worth the money or I'll be better with a brand name. My goal is to make my own turbo setup no more than 9 psi. Answers will be appreciated, thx.

http://cgi.ebay.com/ebaymotors/BMW-E36-323i-325i-328i-M3-92-99-Turbo-Exhaust-Manifold_W0QQcmdZViewItemQQcategoryZ33742QQihZ015Q QitemZ250000488907QQrdZ1QQsspagenameZWDVW

http://cgi.ebay.com/ebaymotors/92-99-BMW-E36-M3-323-325-328-T3-T4-TURBO-MANIFOLD-M-PWR_W0QQcmdZViewItemQQcategoryZ33742QQihZ005QQitem Z150002605440QQrdZ1QQsspagenameZWDVW

01-17-2007, 05:14 PM
Except from Ebay I can't find E36 turbo manafold...Anyone know a place to get a good one?

01-30-2007, 10:29 PM
Custom fabrication? A local shop with a decent history and seasoned welders should be able to take care of the job for you. In that case, it all depends on how well you want the manifold to flow or if you just want a log style (basically something to bridge the gap between the exhaust ports and your turbocharger of choice)

02-17-2007, 08:39 AM
XS Power is also known as SSautochrome. Products made in Taiwan. They look nice, but are of the poorest quality. They are not made thick enough to withstand heat as well as daily driver usage. They crack, and crack, over and over again. Do a search on any Honda, Mitsu, Nissan forum and you'll probably find a 95% customer disatisfaction.