I need help with installing!

[tayfutbol]

Please help me out! I don't know how to install an aftermarket keyless entry, can anyone help me?

Thanks, Taylor

[Ronnaferd]

Did it come with directions of any kind? I installed one in my dad's E36 M3 and I had to take out essentially the whole glove box. behind that is all the wiring and it plugged in there. To get this off you need to take out 8 screws(one in each air vent, and four from behind the glove box door, two down underneath) then you have to take out the glove box light(push it back i think?) and there is a hex bolt in behind the light. :thumbup: If you want some help send me a PM and I'll see what I can do for ya :bigpimp:

[CJH]

The OEM alarm/keyless entry is a plug & play unit.

Others that are straight plug ins:
http://www.thehoffmangroup.com:16080/Stellar/products/products_bmw.lasso

There are likely others out there that go in without cutting & splicing. I personally went with the BMW alarm, good unit.

Cutting & splicing is a pain in the ass, luckily the harness is right there behind the glovebox. Color code:

http://www.unofficialbmw.com/e36/alarm/e36_flash_hazard_lights_with_factory_alarm.html