PDA

View Full Version : 95 325i brake rotor install

1fstws6
08-08-2006, 03:31 PM
How hard is it to install new front rotors on my 95 325i ? I get a bad vibration when laying on the brakes and they have some miles on them for sure. Can anyone give me step by step info and what tools i need like socket size,etc. I also have a bad inner tie rod on the drivers side, so i was told by a local shop my tire has inner wear on it starting show bad.I checked the ball joints by trying to move the wheel in and out from top to bottom and has no play or movement,but side to side it does a little .Is that good way to check.Thanks in advance to all, and also it has over 150k miles.
erickbotic
08-08-2006, 04:27 PM
How hard is it to install new front rotors on my 95 325i ? I get a bad vibration when laying on the brakes and they have some miles on them for sure. Can anyone give me step by step info and what tools i need like socket size,etc. I also have a bad inner tie rod on the drivers side, so i was told by a local shop my tire has inner wear on it starting show bad.I checked the ball joints by trying to move the wheel in and out from top to bottom and has no play or movement,but side to side it does a little .Is that good way to check.Thanks in advance to all, and also it has over 150k miles.

try www.bimmerdiy.com
1fstws6
08-08-2006, 05:27 PM
Seems simple enough.Now to my frontend check.