PDA

View Full Version : Black 95 325is with 82k, parting out


bjl4776
12-10-2006, 07:39 PM
I have a 95 325is black/black with 82,xxx miles and sport package that I have decided to part out. Nothing listed includes shipping unless I posted. I have some other misc e36 and M50 parts. I am probably forgetting something, so If you dont see it ask. PM me or email me at bjl4776@hotmail.com

M50tu w/ rebuilt head- 750
5sp Transmission- 500
3.15 Diff- 400
Driveshaft- 150
M50 manifold- 100
Starter (x2)- 50ea
Alternator (x2)- 50ea
R-134a Compressor- 75
R-12 Compressor 50
Fuel rail w/ FPR (old style)- 20
Fuel rail w/o FPR (new style)- 20
Set stock fuel injectors x2- 100ea
Gauge Cluster (56k)- 125
Guage Cluster (82k, broken plastic)- 50
ICV- 20
Right Rear Interior Panel- 50
Left Rear Interior Panel- 50
Rear seat set- 200
Driver Seat (bad shape, power, sport)- 50
Pass Seat (same as above)- 50
Driver side airbag - 50
Ignition Coil Set- 60
Trunk Lid- 100
Pass Fender- 30
Driver Fender- 30
Driver door (w/ moulding, window, regulator, motor) -250
Pass Door (same as above)- 250
Sunroof motor- 20
Front Brake Calipers- 40ea
Rear Brake Calipers- 30ea
Driver Front Suspension Assmbly- 100
Pass front Suspension Assembly- 100
Front Crossmember- 50
Rear Subframe- 150
Driver Seat belt- 20
Pass Seat belt- 20
Rear Seat belt- 20
Front Bumber (aftermarket, new)- 50
Rear Bumber- 30
Front Bumber rebar w/ struts- 50
Rear bumber rebar w/ struts- 50
Control Modules (I have them all)- 50ea
Steering Rack w/ tie rods amd ends- 200
M3 stock muffler- 150
328i midpipe with no cats- 50
Tailights- 20ea
Headlights- 20ea
Amber turn- 10ea
Side marker (old style, new)- 10ea
ABS Unit- 50
Cruise Control Unit- 40


I don't have the engine harness, DME, or any other part of the interior except those listed above. I do have a megasquirt setup w. wideband O2 if anybody is interested in that. I am open to all offers but don't lowball it.

spooled95gst
12-14-2006, 10:26 AM
what kind of condition are the door panels in? and also the tail lights? do the tail lights come with the bulbs and the connecters to the tails? mine went bad and the brake lights and turn signals dont work ....also the rear panel u are talking about is that the one beside the back sit ....is so i will take that also

need the pass and driver door panel with clips
and the tails

what kind of deal can u give me on those parts shipped and do u have any pics?

ianiac
12-27-2006, 10:35 AM
$750 for the engine??

fun2drive
01-05-2007, 06:32 PM
What amp rating are the alternators? I need a 140A version and were they working when removed from service?
Thanks

mdub
01-11-2007, 11:56 AM
looking for the hood cowl cover

slamtry
01-16-2007, 04:45 PM
Do you have the ABS pump and if so can you tell me if a) it is the version with traction control and b) whether the pump is known (i.e. not assumed) to be working?

Dan

Bavauto
01-25-2007, 05:41 AM
P.M. sent:)

tooserious4u79
05-17-2007, 07:08 PM
do you have an m50 radiator if so how much.

EddieXo
05-20-2007, 04:30 PM
M50 manifold- 100 Is this the intake manifold or exhaust manifold?

nads12345
06-13-2007, 06:59 PM
feeler...how much for drivetrain ( clutch, trans, driveshaft, shifter, and diff)



and how much for the brackets that hold the muffler in place

tooserious4u79
11-04-2007, 03:57 AM
I will buy the midpipes. how much for shipping to 23666. Paypal ready.

Ethirtysicks
11-10-2007, 10:43 AM
im up for the headlights, if they look decent.

300HURST
12-12-2007, 08:03 PM
If you still have the taillights, I'll give you $20 plus shipping or name price. thanks,

Admiral-Awesome
12-18-2007, 11:08 AM
How much for drivers side rubber molding with clips for the rear bumper? Looking for just the drivers side piece in good condition. Thanks.

e46lyf
12-27-2007, 08:41 PM
engine still available?