I'm new, 95' 325is, need some help w/ angel eyes

[Bimr2nr]

Ok, i have the 95' 325is, i wanna get some angel or demon eyes but i don't know how to take my headlights off to save my life...

Seriously they made this rocket science and i dont wanna go to college just to learn this.:bawling:

Anybody got a guide or know a link to a guide?

Second off, wheres a good deal to get cheap/used demon/angel eyes for the e36? I searched ebay and nothing so far.

And i just now know what the fkng *ding* means, thx to the sticky thx!!! lol.

Any other 325i owners out there?

[ianiac]

Just unscrew all the screws holding in the fixtures. There should be three on the top. Than looking down on the inner side of the light theres another screw (youll need a long socket to reach it. Than inbetween the corner light and the main light, theres another one just like that. Do the same thing and it should then be free. Just jiggle it and it should slide out. Than just unclip the wires. Hope that helps what your doing.

[Bimr2nr]

Just unscrew all the screws holding in the fixtures. There should be three on the top. Than looking down on the inner side of the light theres another screw (youll need a long socket to reach it. Than inbetween the corner light and the main light, theres another one just like that. Do the same thing and it should then be free. Just jiggle it and it should slide out. Than just unclip the wires. Hope that helps what your doing.

ooh that thing, thanks. I thought that was just to hold down the black protective cover but i guess theres screws under it lol. Ok so thats 1 problem down, thx man.

[ianiac]

Wait. are you trying to remove the entire fixture? or just the plastic cover in front of the lights??

[Bimr2nr]

Wait. are you trying to remove the entire fixture? or just the plastic cover in front of the lights??

whatever will allow me to get to the bulbs. i need to install my xenon headlights.

[ianiac]

In that case its a little easier. I believe all you have to do is take a screw driver. On each side of the plastic cover, in the middle theres a little metal clip securing the cover. You need to pop those off and youll be able to just pull off the plastic and change them. Im not 100***37; on this but pretty sure.

[Bimr2nr]

In that case its a little easier. I believe all you have to do is take a screw driver. On each side of the plastic cover, in the middle theres a little metal clip securing the cover. You need to pop those off and youll be able to just pull off the plastic and change them. Im not 100% on this but pretty sure.

I checked a while ago, it seemed hard but i'll check tomorrow, thank you.

Also, would anyone happen to know if the stock head unit radio has an RCA plug(s) in the back? or do i have to buy a new head unit?

[DominguesE30]

damn, ever since i bought my angel eyes its been crazy with new posts :)
I must be very enfluencial :)