PDA

View Full Version : 1986 528e... HELP!!!


ingram_528e
04-07-2007, 10:07 AM
i have had a recurrent problem where the fuse for the ac/heater blower melts the fuse and the surrounding plastic of the fuse box. the fuse never blows, just melts the plastic part, eventually turning it black. i have no idea why it does this. can anyone help me? (the wires inside the fuse box look fine)

Rick3649
05-03-2007, 07:18 PM
I think you need to check the armature of the blower motor. Sometimes the brushes will
create deep ridges in the armature and this could cause an increased resistance; but this resistance isn't enough to blow the fuse. If this is the case replace the blower motor. If not, there is resistance somewhere in the circut; the only other place I can think of is in the switch. You could also look at the relay to the blower motor. The last two are very unlikely though. Good Luck
Rick