PDA

View Full Version : Aux input on Business CD #6512-6909881 ?


Captngeetch
07-07-2007, 01:41 PM
I have the BMW Aux Input kit, and the above mentioned In dash CD. My unit and the cable in car are 10 pin. NOT 12. Anyone know where the leads need to go ? obviously it's not what's listed in the instructions....I've tried those pins (3,4,10). Any help is greatly appreciated.

tom @ eas
07-08-2007, 10:15 PM
I have the BMW Aux Input kit, and the above mentioned In dash CD. My unit and the cable in car are 10 pin. NOT 12. Anyone know where the leads need to go ? obviously it's not what's listed in the instructions....I've tried those pins (3,4,10). Any help is greatly appreciated.

Perform the following steps:

1. Turn Radio Off.
2. Turn Radio On.
3. Press and hold the "m" button for about 10 seconds.
4. Press < or > to navigate, you will need to go to the 2nd screen to look for the SW Verison which is in a SV xx-xx xx format.
5. To be AUX , the radio must be SW 43 or higher.
6. Turn radio off to exit.

Captngeetch
07-09-2007, 08:03 PM
Perform the following steps:

1. Turn Radio Off.
2. Turn Radio On.
3. Press and hold the "m" button for about 10 seconds.
4. Press < or > to navigate, you will need to go to the 2nd screen to look for the SW Verison which is in a SV xx-xx xx format.
5. To be AUX , the radio must be SW 43 or higher.
6. Turn radio off to exit.

It's 40xxxxxx What are my options here...can it be flashed ?

tom @ eas
07-09-2007, 08:05 PM
It's 40xxxxxx What are my options here...can it be flashed ?

I need the last 2 digits of what you see on the 2nd screen, the radios cannot be flashed.

Captngeetch
07-09-2007, 08:30 PM
Here's all the info I see...I didn't see a SW # I was mistaken ...it's was SN

SN 40132030
GI 43
HI 320003
SIM 111100
SIP 141401
DSP 0 V 00
Area US
AF Man

that's what I get when I pan thru ..

Appreciate any and all help

tom @ eas
07-09-2007, 10:09 PM
Here's all the info I see...I didn't see a SW # I was mistaken ...it's was SN

SN 40132030
GI 43
HI 320003
SIM 111100
SIP 141401
DSP 0 V 00
Area US
AF Man

that's what I get when I pan thru ..

Appreciate any and all help

None of that shows the info I need. Give me a call from your BMW tomorrow morning and we'll run down the steps in real time.

Captngeetch
07-10-2007, 02:59 PM
None of that shows the info I need. Give me a call from your BMW tomorrow morning and we'll run down the steps in real time.


PM sent

tom @ eas
07-10-2007, 03:05 PM
already replied :)