Members with angel eyes

[DominguesE30]

The ones that have transformers/relays. Im just wondering how u put the cover back on, on the back of the parking/highbeam unit. I cant put mine cause of the freakin wires. Just wondering how u did it. Im considering drillling a hole so the wires can pass thru and silicon the hole like that no moisuture gets in. I dont have mine on atm. Got to be extreamly carefull that no water gets in there. This is what im talking about

http://i136.photobucket.com/albums/q194/dominguese30/DSC01014send.jpg

[jarozila]

What I did was use a dremel to make a slot on the underside of the lid. I passed the wires through the slot. The slot is the widith of the wires so it is a tight fit. This way no moisture can really get into the headlight assembly.

Hope this helps.

[DominguesE30]

so u cut the lid on the side so the wires were able to pass through?

[xxx008xxx]

i took the headlight out, took a dremal and made a one inch slit in the headlight, ran the wires to make sure they fit, and then used black silicone make no moisture come in...basicly what you said....hope it helps. i haven't had ANY problems with it yet...

[jarozila]

so u cut the lid on the side so the wires were able to pass through?


I did it at the bottom - at 6 O'clock rather than on the side (3 O'clock or 9 O'clock). I can't imagine it really matters where you do the cut. I just did the bottom so that it is out of sight.

[joie_d_v]

hmmmmmm not too keen on those, whats the scoop? saw them on a 2000 whatever, didn't care for them!!!! eerie Am I wrong?

[Ronnaferd]

I just put mine in and the little ballast stuck onto the inside of the housing (between the low and high beam) so all the wires are nicely tucked inside. I have umnitza's thinline's.

[oakley]

Cant really work out what im looking at sorry!! Cant see why u would have to cut ur light housing at all? If i ever sell my car I can take my angels and hid's out and the whole light is completely returned to stock..no mods, no cutting, no joining of wires..Just dont see why u'd have to start messing with ur light units?!

[DominguesE30]

my transformer is pretty big. Jarozila has the same kind so he would know

[oakley]

hummm, iv got as transformer on mine too...iv hooked it up under the front chassis bar...sort of under where ur bonnet switch is on the pic..get me?? that way its covered from the elements quite well..but they should be waterproof ish anyways..

[DominguesE30]

yeah i know they are waterproof. Im talking about the covers that clip on the back of the light housing that cover the high's and the parkers. Now because ive got wires comming out from the angel eyes i cant put the cover on. Im just wondering how u boys did it. Did ya drill thru etc etc etc