E34 520i
10-16-2007, 03:39 PM
When i buy my car from the previous onwer i find out that all the tools were gone, so i decide to make a realy good tool box.
When i was cleaning thw car i fount this space beneath the boot carpet:
http://www.jimnyclub.gr/gallery/d/50381-1/__________________+______+E______________++BMW+003 _001.jpg
I used an MDF wood plate (use what ever wood you like but not more then 1cm, of thickness thats an 0,3937 of the inch because it will exceed the whole) about the size of the whole. I also cut a black carpet at the same size.I turn the black carpet and mark the tools on the white side so i can cut and pass the scratch tapes:
http://www.jimnyclub.gr/gallery/d/50366-1/________________+BMW.JPG
The scratch tapes are used to hold the tools at ther place, as you can see at this image:
http://www.jimnyclub.gr/gallery/d/50369-1/________________+BMW_.JPG
The next step is to spray the glue at the MDF:
http://www.jimnyclub.gr/gallery/d/50386-2/__________________+______+E______________++BMW+014 .jpg
The back side of the carpet before i stick it:
http://www.jimnyclub.gr/gallery/d/50389-1/__________________+______+E______________++BMW+015 .jpg
The tool box ready:
http://www.jimnyclub.gr/gallery/d/50392-2/__________________+______+E______________++BMW+020 .jpg
And installed:
http://www.jimnyclub.gr/gallery/d/50378-1/__________________+______+E______________++BMW+001 .jpg
As you can see, nothing is changed:
http://www.jimnyclub.gr/gallery/d/50372-1/__________________+______+E______________++BMW+006 .jpg
:thumbup:
When i was cleaning thw car i fount this space beneath the boot carpet:
http://www.jimnyclub.gr/gallery/d/50381-1/__________________+______+E______________++BMW+003 _001.jpg
I used an MDF wood plate (use what ever wood you like but not more then 1cm, of thickness thats an 0,3937 of the inch because it will exceed the whole) about the size of the whole. I also cut a black carpet at the same size.I turn the black carpet and mark the tools on the white side so i can cut and pass the scratch tapes:
http://www.jimnyclub.gr/gallery/d/50366-1/________________+BMW.JPG
The scratch tapes are used to hold the tools at ther place, as you can see at this image:
http://www.jimnyclub.gr/gallery/d/50369-1/________________+BMW_.JPG
The next step is to spray the glue at the MDF:
http://www.jimnyclub.gr/gallery/d/50386-2/__________________+______+E______________++BMW+014 .jpg
The back side of the carpet before i stick it:
http://www.jimnyclub.gr/gallery/d/50389-1/__________________+______+E______________++BMW+015 .jpg
The tool box ready:
http://www.jimnyclub.gr/gallery/d/50392-2/__________________+______+E______________++BMW+020 .jpg
And installed:
http://www.jimnyclub.gr/gallery/d/50378-1/__________________+______+E______________++BMW+001 .jpg
As you can see, nothing is changed:
http://www.jimnyclub.gr/gallery/d/50372-1/__________________+______+E______________++BMW+006 .jpg
:thumbup:
