PDA

View Full Version : Replace rear roundel emblem


skitime
02-02-2008, 11:28 AM
Hey, anybody replaced the rear emblem? I got some black and white roundels, the front one just gets pried up, but the rear seems like it's on a mounting plate. Haven't seen any discussions on replacing that one anywhere......

Skottoman
02-03-2008, 10:31 AM
Would be good to know. I'd like any info on replacing roundels, as this will be one of the first mods we do...
Cheers,
Skottoman

skitime
02-05-2008, 11:35 AM
Anybody have any body shop contacts?

Evlengr
02-05-2008, 03:39 PM
A small bit of DC voltage would put a stop to that emblem removal. Kind of like the electric fences on a farm.

When in doubt apply voltage.

Skottoman
02-05-2008, 05:23 PM
A small bit of DC voltage would put a stop to that emblem removal. Kind of like the electric fences on a farm.

When in doubt apply voltage.

Don't think that would work. :dunno:

Anyway, i'll be doing the front and rear, anyone else with actual experience removing the stock ones?
Cheers,
Skottoman

skitime
02-05-2008, 05:51 PM
The front is really easy, just use a plastic card under a small flat head screwdriver, and pry up at the 3 & 9 o'clock positions. It comes out with plastic grommets attached, put those on the new one, and press down. The rear looks like it might be one piece, so I didn't try to pry that off. Hoping someone might know....