PDA

View Full Version : Angel Eyes Install - Headlight removal questions


PeteC
02-06-2008, 08:49 PM
In preparation for installation of Angel Eyes on my Xenon 2006 X3 wondering what the steps are for removal of headlights with washers?


Reading thread found:

1. "The headlights have 4 simple screws to take out, unplug the headlights and then just wiggle and wiggle until you find the right angle to slide them out."

2. "I found that removing the 2 screws that hold down the kidney grill area will give you more room to take out the headlights."


Any pictures around?

Once removed and prior to baking saw a reference regarding removal of all non headlamp parts.

PeteC
02-18-2008, 09:25 PM
Bump

Sonoman707
02-18-2008, 10:32 PM
http://www.x3world.com/articles/x3/lights/9616-angel-eyes-retrofit-x3.html

Maybe this will help... although I think they look good - it is not an endeavour I have taken on.

PeteC
02-28-2008, 04:25 AM
Thank you for the link. Electronics / wires are not an issue and should be relatively simple. Its the endeavor of taking out the headlights/baking that I am looking for more details on.