kapao818
03-18-2008, 05:59 PM
This is actually a continuation of Elvis530i 's DIY (thanks for your great DIY and pics on the DIY). i just added a few more pictures and I'm going to explain on how to get that 2nd clip loose.
this is elvis530's DIY. i followed his steps
http://www.bimmerfest.com/forums/showpost.php?p=1624280&postcount=22
To get to the 2nd clip, you would have to remove the "L" shaped tube on the top of the airbox.
http://img.photobucket.com/albums/v482/kapao818/BMW/IMG_0358.jpg
Then using the hole, you have to look inside and towards where the air horn is. You should be able to see the clip.
http://img.photobucket.com/albums/v482/kapao818/BMW/Gettingtotab2.jpg
using a flat head-screw driver, you have to push clip towards the airhorn so it won't hook onto the airbox.
http://img.photobucket.com/albums/v482/kapao818/BMW/Gettingtab2out.jpg
*the screwdriver head suppose to be on the other side but i wanted to show how the clip is
once both clips are loose, pull that sucker out. good luck. :thumbup:
this is elvis530's DIY. i followed his steps
http://www.bimmerfest.com/forums/showpost.php?p=1624280&postcount=22
To get to the 2nd clip, you would have to remove the "L" shaped tube on the top of the airbox.
http://img.photobucket.com/albums/v482/kapao818/BMW/IMG_0358.jpg
Then using the hole, you have to look inside and towards where the air horn is. You should be able to see the clip.
http://img.photobucket.com/albums/v482/kapao818/BMW/Gettingtotab2.jpg
using a flat head-screw driver, you have to push clip towards the airhorn so it won't hook onto the airbox.
http://img.photobucket.com/albums/v482/kapao818/BMW/Gettingtab2out.jpg
*the screwdriver head suppose to be on the other side but i wanted to show how the clip is
once both clips are loose, pull that sucker out. good luck. :thumbup:
