caylan
05-22-2003, 10:08 PM
Bob H's recommendation (http://bimmer.roadfly.org/z3coupe/messages/archive/msgsy2001w39/54969.html)
IN BOB H's opinion only a front swaybar is needed to minimize body roll on high speed cornering. Since the stock rear bar is pretty much "perfect" & is akin to the medium setting on the aftermarket bars.
I'm thinking of getting a UUC 27mm front bar & setting it @ full soft. I think this won't exacerbate the understeer & definitely lessen body roll.
Really the only real concern IS will the increase in bar size (23 stock to 27 modded) increase understeer too much?
I can always play w/ the tire pressure if understeer creeps up w/ this setup right?
I have H&R/Bilstein & some negative camber so the car handles great save for the body roll.
Any thoughts would be appreciated.
IN BOB H's opinion only a front swaybar is needed to minimize body roll on high speed cornering. Since the stock rear bar is pretty much "perfect" & is akin to the medium setting on the aftermarket bars.
I'm thinking of getting a UUC 27mm front bar & setting it @ full soft. I think this won't exacerbate the understeer & definitely lessen body roll.
Really the only real concern IS will the increase in bar size (23 stock to 27 modded) increase understeer too much?
I can always play w/ the tire pressure if understeer creeps up w/ this setup right?
I have H&R/Bilstein & some negative camber so the car handles great save for the body roll.
Any thoughts would be appreciated.