PDA

View Full Version : FTM Reset

chuck.smith03@c
08-17-2008, 04:52 AM
After mounting four new tires, the flat tire monitor indicator lamp remains on and won't reset? Any ideas or suggestions on how to reset the lamp? I have drive the car several at least 25 miles, and have stopped and started the engine a few times.

Thanks In Advance for any tips.
noego
08-17-2008, 06:07 AM
RTFM, Chuck
X3 Skier
08-17-2008, 06:13 AM
The owner's manual has the procedure to reset it. IIRC you press and hold the button on the console for 5-10 seconds.

Cheers
AzNMpower32
08-17-2008, 07:22 AM
At a standstill, press and hold the (!) button at least 5s, and then drive off immediately. The system will reinitialise.
Just Bryce
08-17-2008, 07:23 AM
I have a good friend named Chuck Smith, he also refuses to read the manual :rofl:
petener999
08-17-2008, 11:31 AM
:thumbup:go to setting click on vehicle, click on FTM then click reset. Make sure your engine is on... Hope that help
AzNMpower32
08-17-2008, 11:37 AM
:thumbup:go to setting click on vehicle, click on FTM then click reset. Make sure your engine is on... Hope that help
The Check Control is NOT on the X3 or Z4. This is E46 software we're talkin about, good ol'-fashioned dash button.