PDA

View Full Version : clutch hit the floor low hydr. fluid


brcarey
12-22-2008, 06:43 PM
I think I need to replace the slave cylinder on my 95 e34 m60 with five speed. We have been getting temperatures in the single digits for about 2 weeks now. I went out to start my car. I pushed in the clutch it hit the floor with no resistance. and stayed on the floor until I pulled it up then the spring took over. I have never delt with this before can anyone give me some advice. If I need to check the lines or slave cylinder. Not sure were to find them. thanks for the help in advance.

attack eagle
12-22-2008, 10:23 PM
slave is on the tranny

master is on the pedal box.

change both together.