PDA

View Full Version : Fun With Photoshop [Opinions Wanted]


VCOUI
01-23-2009, 02:50 PM
Hey all,

I've been messing around in Photoshop and made a few subtle "hotrod" mods to my 2006 3.0si. The car sometimes reminds me of the old Hotwheels, especially with the 5 spoke wheels, I just made a few subtle changes to enhance the hotrod effect and was hoping to get some comments on the ideas.

The mods are as follows:
-19 inch front wheels with 20 inch rear.
-Lowerd
-Red Stripe Tires ala Hotwheels =]
-BMW Motorsport tri-color pinstripe

Don't pull any punches.... let the comments fly.

Cheers!

P.S. You can see the stock look in the sig below for comparison.

http://farm4.static.flickr.com/3372/3221370114_3f6b1493a4_b.jpg

jaaX3
01-23-2009, 02:53 PM
Not diggin' the pinstripes
The tires on the back look a lot bigger than 20"
Stripe on the tire isn't horrible
LOVE the lowered look, but get it off that road!
:thumbup:

VCOUI
01-23-2009, 04:15 PM
OK... just for ****zngiggles... here's the car completely stock the the red stripe-tires as the only mod.

Note, the rear tires are Goodyear Eagle F1s and the fronts are stock Bridgestone RFTs. The RFTs have a more rounded shoulder and therefore a slightly smaller sidewall so it may appear as if the rear tire is bigger; other than that the car is bone stock.

http://farm4.static.flickr.com/3095/3221542930_396c2dfb92_b.jpg

Z4luvr
01-23-2009, 06:15 PM
My opinion is "What is this doing in the 2009+ Z4 forum?"

Glad it's just a Pshop. The second photo looks better. The stripes are : puke:

VCOUI
01-23-2009, 08:37 PM
Damn... my bad... thanks for pointing that out to me... Was wondering why there were so many posts about the "new" Z4...heheh....

**Moderator, please bump this to that other Z4 forum... Thanks!**

VCOUI
01-24-2009, 12:21 AM
OK... Been playing more with Photoshop and I have something that I've been toying with, I love my wheels and personally think they're about the best BMW has to offer for the Z but they've always bothered me because they feel too small due to the inner wheel. So I've been thinking what it would look like if I polished the outer lip and had the inner's powder coated something a little darker such as Titanium. You're thoughts on the photoshops below.

P.S. Hopefully the moderator will bump this to the other Z4 forum soon...

Cheers!

http://farm4.static.flickr.com/3376/3222292272_36370dcabb_o.jpg

http://farm4.static.flickr.com/3306/3222292214_b0cab63c6f_b.jpg