bcm re-set

[farrk007]

can anyone please explain to me how i'd reset the bcm? so that my door windows roll up and down ok?
i just replaced the driver side window regulator and its still acting up? switch is fine as well as the motor.

[hornhospital]

Did you do this?:

From the Bentley manual:

1) Close the door and turn ignition key on. Fully open the window

2) Fully close the window

3) Hold the window button in up position for at least five seconds after window is closed

4) Repeat for remaining window (if needed)

5) The windows should now be initialized and the anti-pinch and one touch up/down functions should be enabled.

[farrk007]

Thank you very much!