PDA

View Full Version : 320i Clutch Issues


07frimic
10-12-2009, 12:04 PM
I have recently purchased a 1979 320i and am currently restoring it. The clutch has an issue and will not disengage. i can push the clutch to the floor with little resistance and was wondering if anyone had any suggestions as to what might be wrong. i am considering beading the clutch fluid as it has sat for about 5 years, but am unsure if that is the right choice. i would appreciate any advice available.

lucasair
11-06-2009, 12:38 PM
You can try adding fluid and bleeding the system. More likely you will find the slave or master cylinder or both will need to be rebuilt.