PDA

View Full Version : Question about map cd's


montehall
07-23-2010, 06:13 PM
I purchased my 04 745i from a Toyota dealer (but had a BMW dealer look it over) and it didn't have map CD's
The Toyota Dealer agreed to purchase them, so they ordered these from the BMW dealer:
http://img.photobucket.com/albums/v257/Wilson1911/2010-07-23200432.jpg

http://img.photobucket.com/albums/v257/Wilson1911/2010-07-23200500.jpg

They don't work. Still asks me to input map cd's.

these say "Tele Atlas" brand and I'm fairly certain the CDs' (DVD's?) should be Navteq.

What do i need?

montehall
07-23-2010, 08:22 PM
Here are some pics of my NAV drive.
the p/n points to nav02, but it doesn't have the DVD logo. I'm befuddled
http://img.photobucket.com/albums/v257/Wilson1911/Drive.jpg

http://img.photobucket.com/albums/v257/Wilson1911/partnumber.jpg


BTW, I did hit the search, but to no avail.

greco2000
07-23-2010, 08:46 PM
Hey brother, the 1st problem is you have a CD drive and your trying to have it read a DVD. If Im not mistaken in 04 or so they made the switch to DVD Nav systems. The bad news is you wont be able to get the most up to date maps, because the ones on the CD are older. Other alternative is to switch to DVD nav, which costs big bucks! Anyone with a CD Nav can burn the cd for you. Let me know if you want me to, I have the same.

montehall
07-23-2010, 09:00 PM
I thought the same thing, however, after some research, I do have a NAVI02 part number... weren't NAVI02's dvd based? IIRC, NAVI02's were standard halfway through the 2003 Model year, and I have a 2004.


but since I use my navigation on my droid just fine, the issue of the "low performance" cd-based nav isn't a concern... although, yes, I would love a set of nav CD's.

montehall
07-25-2010, 12:55 PM
NAVI01 part numbers.

65.90-6 913 883
65.90-6 919 128
65.90-6 920 570
65.90-6 921 398
65.90-6 921 399
65.90-6 921 919
65.90-6 922 642
65.90-6 923 555
65.90-6 925 270
65.90-6 927 712
65.90-6 929 592
65.90-6 935 555

NAVI02 and NAVI03 part numbers.

65.90-6 927 823
65.90-6 935 555
65.90-6 939 151
65.90-6 942 166
65.90-6 943 642
65.90-6 947 829
65.90-6 948 983
65.90-6 951 629
65.90-6 959 114
65.90-6 966 511
65.90-6 971 353

Mr_Burger
07-25-2010, 06:34 PM
It looks like a NAVI01 CD unit which someone has stuck a NAVI02 label on..:)

montehall
07-25-2010, 06:38 PM
is there a way to know for sure?

Mr_Burger
07-26-2010, 05:43 AM
NAVI01
http://www.bimmernav.net/Navi01.jpg

NAVI02 & NAVI03
http://www.bimmernav.net/Navi02-3.jpg

:)

tight_white745
07-26-2010, 01:34 PM
It looks like a NAVI01 CD unit which someone has stuck a NAVI02 label on..:)
+1 sorry to here that

Mr_Burger
07-26-2010, 01:55 PM
A drive matching your OEM pt number is on ebay at present & it IS a DVD NAVI02..

http://cgi.ebay.com/ebaymotors/BMW-E65-E66-NAVI02-GPS-Navigation-System-OEM-/120600039746

montehall
07-26-2010, 04:33 PM
But... but... what if it was a navi02 with a navi01 faceplate?:cry:

flewis1
07-26-2010, 06:10 PM
But... but... what if it was a navi02 with a navi01 faceplate?:cry:

Highly doubt it as your DVD's aren't even reading. As a previous poster mentioned, you more and likely have a NAVI01 unit with a NAVI02 label. btw-Navteq was a vendor up until last year. BMW is now using Tele-Atlas which also works on the NAVI02 and NAVI03 DVD systems. If you want to verify for sure that you have a NAVI01 sys, I can send you out an old CD I have if you PM your mailing info. That way once that works, you can purchase CD sets on ebay or upgrade your hardware to NAVI03 which has the following UI

http://www.youtube.com/watch?v=sfZzhmeE6ys.

montehall
08-04-2010, 05:59 PM
Son of a b...

So I decided to dissect my NAV drive.

Turns out the internals are all NAVI01. the top lid (where the label is) was from a NAVI02. pisses me off. That's one of the things I checked prior to purchase of the vehicle.

Mr_Burger
08-05-2010, 08:05 AM
Told ya..Now go get yourself a NAVI03.. :)

montehall
08-05-2010, 08:07 AM
my $800 will find better uses.
I have a Garmin and GPS on my phone.

mikefrey
08-11-2010, 07:49 AM
cornering lamp malfunction??????????? light bulb or more???????

irokdastar383
08-11-2010, 08:00 AM
just get the c for the driver that you have and be done with it.