whats going on everyone. so since we been having alot of snow one of my wippers (driver side) started to lag. so before i went to the mechanic i did some work and go it working and this is how. the pass side is basicly put on the motor no adjusting. the driver side has adjustment.
1. open the hood
2. there is a plastic cap on wiper blade handle.pull it up gently and it will come off.
3.no alighn the driver side wipper so it sits tucks low enough below the hood and not interferring with anything.
4. take a socket and wrench and tighten down the bolt on the driver side wipers.
5. and you dont test and put everything back into place. i hope this helps you guys out
1. open the hood
2. there is a plastic cap on wiper blade handle.pull it up gently and it will come off.
3.no alighn the driver side wipper so it sits tucks low enough below the hood and not interferring with anything.
4. take a socket and wrench and tighten down the bolt on the driver side wipers.
5. and you dont test and put everything back into place. i hope this helps you guys out