PDA

View Full Version : Set of 4 BBS RC w/ Z1 Star Specs


eneyeengee
05-20-2011, 12:35 AM
Time for a new look so I'm letting these go. Wheels/tires are off the car ready to find a new home.

Wheel/Tire specs:
* BBS RC303 18x8.5+38 hub bore is 72.6. Center BBS RC twist on caps are included
* Dunlop Direzza Z1 Star Specs 255/35/18 two tires have tread at 50% and the other two have 70%.
* No rash, bends, leaks, tears, holes, etc.

Info:
* Wheels/tires have seen 2 HPDE Events (accounting for some of the difference in wear)
* 5mm spacer is required up front to clear my TCK S/A struts.
* Wheels clear my 325mm Wilwood 4 pots without spacers.

Asking price:
$1200 for wheels alone (picked up)
Tires SOLD

Pictures:
center caps I am referring to
http://i14.photobucket.com/albums/a334/eneyeengee/06.jpg

bbk clearance
http://i14.photobucket.com/albums/a334/eneyeengee/06-1.jpg

http://i14.photobucket.com/albums/a334/eneyeengee/Dave.jpg

http://www.canibeat.com/wp-content/uploads/2011/03/LTBMW_58.jpg

As of Bimmerfest 2011:
http://i847.photobucket.com/albums/ab39/Hacauce46/Bimmerfest%202011/IMG_8647.jpg
http://i14.photobucket.com/albums/a334/eneyeengee/Dave02.jpg
http://i14.photobucket.com/albums/a334/eneyeengee/Dave03.jpg

godora102192
05-20-2011, 12:02 PM
are you willing to part out the wheels alone ? If so Pm me the price, i m interested/local.

Thanks

TheSandeman
05-24-2011, 11:11 PM
damn nice set of wheels

eneyeengee
05-25-2011, 06:04 PM
ttt

eneyeengee
06-09-2011, 04:04 PM
tires are sold. Al PMs replied to

eneyeengee
08-24-2011, 07:08 PM
Want these gone, throw me some offers.

eneyeengee
09-01-2011, 04:38 PM
Lots of tire kickers, but still available.

shill1310
09-23-2011, 10:34 AM
will these fit on my 06 325i?

fplanner2000
09-23-2011, 10:56 AM
Wondering if these will fit my 2011 550ix? If so, interested in the wheels.

eneyeengee
10-13-2011, 07:15 PM
These will bolt right up to the e90/e92 hubs, you might want to run spacers if you want a more "flush" look.

I am not sure if these will fit on the F10/F11 vehicles. If you know your factory wheel specs (width, offset, hubbore) I can give you a more definitive answer.

That being said, these have been sitting way too long so $1000 takes them. I will work with those of you who require shipping.

eneyeengee
11-16-2011, 12:58 AM
Sold