PDA

View Full Version : DSC & DTC unavailable after INPA


AlSmith1964
07-01-2012, 03:25 PM
After playing with INPA I did something now I have no ability to turn on or off DSC & DTC. I get an error when starting caution drive control. Please help!

Keif
07-01-2012, 03:44 PM
What sections were you in while in INPA?

Have you looked at the faults in the DSC and ARS modules yet? What are they?

Sent from my ADR6425LVW using Bimmer App

bmw74me
07-01-2012, 08:03 PM
I had the same problem with inpa , will the problem was not inpa it was me ....anyway after3 month of driving with the DSC on, I decided to go back and fix the problem.... It turned out to be ,will at least in my case the steering angle sensor ...you just had to re-visit that section and re-set it while your steering wheel is straight ... Hope that helps ...

AlSmith1964
07-02-2012, 04:52 PM
Thanks for the reply, to make a long story short I put new gears in my auto parking brake actuator. Found out I had to activate it, got INPA and was playing around got the brake activated, but somehow I deactivated the DSC, DTC. Now when I start it I get ***8220;! Drive Control Drive Moderately***8221;. Traction control is off, and Idrive can***8217;t turn it on.

I did mess with the steering because it won***8217;t move in or out. Man this is complicated.

AlSmith1964
07-02-2012, 04:52 PM
Thanks for the reply, to make a long story short I put new gears in my auto parking brake actuator. Found out I had to activate it, got INPA and was playing around got the brake activated, but somehow I deactivated the DSC, DTC. Now when I start it I get "! Drive Control Drive Moderately". Traction control is off, and Idrive can't turn it on.

AlSmith1964
07-05-2012, 03:53 PM
What section are the DSC and ARS modules located, sorry to be to ignorant