PDA

View Full Version : For Those Of You Who Want To Access The Hidden Menu


Rookie2008
08-20-2012, 11:22 AM
For those of you who want to access the hidden menu please read. This option will allow you to check your current operating voltage level, engine temp an many more options which cannot be seen through the I drive follow these steps. 1st hold the reset button, the next light that would pop up would be "ABS". Ignore that and keep holding the reset button. There will be a second screen popping up, ignore that one as well and keep holding the reset button. As soon as the third screen pops up, release the reset button. This screen would have approx 15 or 16 options. Go the option which says "unlocking". Press and hold reset button. The unlocking menu will now appear on the right side. Input your unlocking code (for me it was 11 - add last 5 digits of your VIN number). As soon as you put the code, hold the reset button. The screen on right side would disappear now and you would be back to 15-16 option screen. Now go and select the desired option an press and hold the reset button while on the selected option. You would now see the info on the right side of the screen. I give all credit to "itsgonabeme".

wjjklj
08-21-2012, 05:17 PM
On the 745 unlocking is item number 19.

Big N Fast
09-03-2012, 07:53 AM
Just like rookie 2008 said...add the last 5 digits together! Thanks rookie!

Thesatman
03-01-2013, 09:52 AM
Can anyone provide an explanation for each option available to select? Yes, ones like the charging mv reading are easily understood...but there are several that are not.

XaSeR
07-22-2013, 04:56 PM
What is the "SW-reset ?" ?

wjjklj
07-24-2013, 07:02 AM
Software reset.


Sent from BimmerApp mobile app

Thesatman
09-04-2013, 06:30 AM
Software reset.


Sent from BimmerApp mobile app

Yeah but has anyone done it to see what it does?

bluzplayer
09-10-2013, 12:05 PM
I wanted to unlock so I could display my battery voltage in the Combi, but I was not able to find the code (i.e. 11, or 19). Also, the instructions above mention adding the last 5 digits of the VIN, how exactly is that done? I can use the button to advance 1, 2, 3, ...45 but cannot go past that limit. So is it something like 11 + 12345 = 26 or is it 1112345? Specifics are better! I read another post that mentioned turning the button on the Combi instead of pressing it, have not tried that yet...

Ed

Big N Fast
01-13-2014, 04:43 PM
If the last 5 digits of your vin were 12345, your unlocking code would be 1+2+3+4+5 which equals 15. Therefore, your unlocking code is 15. Keep pressing the button until you get to unlocking and then hold the button until it changes. Once there, tap the button until it counts up to 15 and then hold it when you are there. It will now be unlocked.


Sent from BimmerApp mobile app