PDA

View Full Version : Advise on clear bra brands.

TripleX5 ®
10-26-2004, 03:58 PM
Looking to get my 4.8iS X5 wrapped and have boiled down to two kits.

Armorglove (http://65.36.137.11/index.html) and X-Pel (http://www.xpel.com/products/default.asp).

Cost on install on both brands are about the same so just wondering any info I should know and what some prefer. :dunno:

Much appreciated. :thumbup:
TOGWT
10-27-2004, 04:51 AM
~One man’s opinion / observations~

I’ve used and would recommend Xpel products (headlight protection). I checked both sites but couldn’t find a spec on the Amorglove site.

~Hope this helps~

Knowledge unshared is experience wasted [each one / teach one]
justadumbarchitect / so I question everything/ JonM
JetBlack330i
10-27-2004, 05:23 AM
Aubade. Hands down (if you can keep them down). :eeps: :angel:
hockeynut
10-27-2004, 02:09 PM
Aubade. Hands down (if you can keep them down). :eeps: :angel:

Nice, but I think the request was for a "clear" bra :D
JetBlack330i
10-27-2004, 04:31 PM
:eeps:
http://www.bimmerfest.com/forums/attachment.php?attachmentid=39121&stc=1
Intermezzo
10-27-2004, 11:24 PM
I currently have the XPEL bra (full set) on my wife's Audi. Don't have any experience with Armorglove so I can't give you any comparisons between the two. However, IMO any difference between these two products will not be nearly as important as the quality of the installation. I was unhappy with the job done on our car, so I removed the areas I didn't like and re-installed it myself. It took me the entire weekend, but the difference is like night and day.

Unless you're very good at things like this, I wouldn't recommend you do it yourself (I certainly aren't going to do it myself again!) Just be sure to find someone who'll do a good job and not leave any swirls when prepping your paint.
Mr. The Edge
10-28-2004, 05:40 AM
:confused:

http://www.bimmerfest.com/forums/showthread.php?t=76496

:dunno:
hockeynut
10-28-2004, 12:15 PM
:eeps:
http://www.bimmerfest.com/forums/attachment.php?attachmentid=39121&stc=1

:yikes: :) :D :thumbup:


:angel: :angel: :angel:
TripleX5 ®
10-28-2004, 03:29 PM
:confused:

http://www.bimmerfest.com/forums/showthread.php?t=76496

:dunno:

Jus trying to get info from both worlds cuz. Detailing experts here as well as my fellow X crew over there. That ok w/ you? Or are you still :confused: ? :D

btw, thanks for the very informative input everybody. :thumbup: