Headlight aiming/adjustment?

[allen85t]

I've got one out of whack, poked around a bit looking for a screw under the hood.. couldn't find one that seemed like it was going to do the trick.

Could someone explain (maybe with a nifty photo even! heh) where the vertical aiming adjustment is for the headlights?

I'm suddenly in the dark since for whatever reason alldatadiy doesn't have bimmers.. :/

Thanks.

[WrrEagle97]

If you'll open up the hood and look on the back of the light frame, there are two white plastic adjustment knobs which require an allen wrench. I can't remember what size but make sure you get the right one or you'll strip it.

[allen85t]

If you'll open up the hood and look on the back of the light frame, there are two white plastic adjustment knobs which require an allen wrench. I can't remember what size but make sure you get the right one or you'll strip it.

Thanks, once I knew what I was looking for, twas as easy as it should be. If anyone else can't find these, I'll snap a picture and circle it.

Key size is 6mm.