Bimmerfest - BMW Forums - View Profile: doru

Welcome to Bimmerfest -- The #1 Online Community for BMW related information! Please enjoy the discussion forums below and share your experiences with the 200,000 current, new and past BMW owners. The forums are broken out by car model and into other special interest sections such as BMW European Delivery and a special forum to voice your questions to the many BMW dealers on the site to assist our members!

Please follow the links below to help get you started!

Go Back   Bimmerfest - BMW Forums > Members List

doru doru is offline

Officially Welcomed to the 'Fest

Visitor Messages

Showing Visitor Messages 1 to 6 of 6
  1. doru
    04-09-2014 07:38 AM
    Chip, sorry if I'm too late for this - didn't check my inbox lately. I will measure the press kit and I will let you know. You will need 3 different diameters: The big one to receive the ball joint. An intermediate to press it in and a smaller one to press it out. The BMW kit comes with 4 different diameters - not sure what the 4th is for (as of yet). I'm at work right now, but when I come home, I will let you know.

  2. poolman
    04-06-2014 10:11 AM
    Hi Doru- Getting ready to tackle the ball joint DIY. If possible,,would you measure the inside diameter's of the ball joint tool that you use to do the procedure with. I have quiet a collection of Volvo tools of the same type as the one that you have,,but would like to make sure that I have something ready of make somthing ready before jumping in for this work.
  3. doru
    08-06-2013 09:18 AM
    Long story: Changed every single front suspension component and wheel bearings, the crunch was still there. decided to ship the coilovers to Bilstein. They said they tested good (kept them for over 2 weeks!!!), still didn't received them as of today (6th August, sent start of July!!!). I also read that I need those pesky 9/16" grade 8 lock washers which will cure the crunch - there was a long post from 2008, which I stumbled across too late. If those washers won't fix the problem, I will re-do the whole rear end as well.
    I just replaced the rear ball joints on the X5, and thank god I have that BMW special tool to remove them. They are identical, same p/n as for the e39, so I know this will be easy. I think I will use Michel's DIY as a guide combined with the Bentley. The rear bearings seem to be a handful.

    Thanks for the heads-up,

    Cheers, Dorin
  4. poolman
    08-02-2013 12:11 PM
    Hey Doru--Just thought I'd drop a line--back a few weeks ago you were posting about the clunk coming from the front of your car and couldn't figure what was happening. I had the same thing going on and thought mine was coming from the front also--It turned out to be the rear subframe bushings in my car were shot--I changed them about 2 weeks ago and all is well now--but for the life of me I thought the problem was from the front of the car--this problem fooled me--just thought you might be interested in my findings
    Chip (poolman)Roberson
  5. Solidjake
    09-02-2009 08:26 PM
    Peace to you
  6. fafwa45
    04-22-2009 10:43 PM
    Hey I noticed the car in your sig has m5 style rims. Do they come stock or are they replicas?

About Me


Total Posts
Visitor Messages
General Information
  • Last Activity: 06-28-2017 08:12 AM
  • Join Date: 09-28-2007
  • Referrals: 0

All times are GMT -7. The time now is 06:15 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
© 2001- VerticalScope Inc. All rights reserved.