Nline6

that sucks im going to order mine this week i hope every thing goes well..

yea i need to make one and i need to order the arms and brushings as well im thinking of installing them my self do you think it would be hard

does your car shake when your going 60+ if you turn thr wheel a lil

do you have pics of your heat shield for your cai im thinking of making one...thanks

No problem on the reassuring buddy. and if you have any questions on it, let me know, as I did almost everything I could do wrong on the install, so I know the pitfalls well lol.

Thanks for getting back to me. I actually just installed my new Control Arms with Ball joints and new Bushings last night. Fixed my issue! By the way, if you have not already ordered your bushings I HIGHLY recommend getting the new Lollipops (bushing brackets) with the bushings already installed. Because getting the old bushings out and the new ones in is a PAIN! Anyways, good luck, I am confident this will fix your problem as it did mine

Nline6 I was searching through these forums and found your post, and my car does the EXACT same thing, down to the very last detail. I was also planning on replacing the lower control arms, ball joints, and bushings. But i wanted to see how that went for you (assuming you have done that). It's a lot of money to spend if that doesn't fix the problem. So please message me back or email me christian@stein-tech.com if ou get a chance.

Thanks!

Um, it doesn't sound completely hard to install the bushings into the brackets but i didn't have time or was I in the mood to be pounding the bushing in. But, I had the bushings that were full rubber in the middle but it was HD. You know what, I would go OEM as well, UNLESS the price difference is tremendous (like $100+) only because i did of course feel the difference with handling but that was only because my old assembly was going to fall apart. So what im saying is i dont think that the difference between the OEm and HD are much different, but maybe they last longer and don't wear out as fast.

sorry, i havent been on the fest in a while. Anyway, i didnt get the tie rods. I just got the Control Arms (with ball joints installed), and the brackets (whit the bushing installed). So it made everything a ton easier. And i got them from OEMbimmerparts.com. You can also get it for $220 without the brackets, or $300 with the brackets. I think you should just get the brackets along with it.

love that ****..