BimmerFest BMW Forum banner

FS-03 Drive Shaft & halfshafts

3K views 2 replies 2 participants last post by  Steven Ferrario 
#1 · (Edited)
Last year I went to replace my 01 drive shaft as it was beginning to ping when pulling away from a dead stop. I found one & purchased from another board member, however upon installation discovered that then length was a bit shorter on 03 & newer drive shafts vs 01.
I ended up replacing with a new shaft.
So I have no need for this drive shaft. Also have half shafts..both parts came off 03 M5 with 41k.
$600 for everything.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top