Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (
-   E36 (1991 - 1999) (
-   -   Help with fitting digital clock/temp read out (

bigcollins25 06-23-2007 08:31 AM

Help with fitting digital clock/temp read out
Hey guys. I am pretty new to this forum so go easy on me ;-)

Moving on to the problem.
currently have a analog clock and I would like to upgrade to a digital clock/temp read out.

I am very careful to say digital clock/temp read out because it it not an OBC......

I have torn the old clock out and the digital clock/temp read out is in place but it does not work.

What I Had going to the old clock:
Red-Yellow (Power)
Red-Grey (illumination)
Brown (Ground)

I have a seen a diagram for an 18 button OBC online, and apparently the digital clock/temp read out has the same top 10 pins on the connector?:eek:
but I am not sure because that diagram is for a 1998 E36 not a 1991 like mine.
Here is the diagram I am referring to:

Really I am not sure what to connect to make this thing work:eeps:


All times are GMT -7. The time now is 10:09 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
© 2001-2015 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms