Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (http://www.bimmerfest.com/forums/index.php)
-   E36 (1991 - 1999) (http://www.bimmerfest.com/forums/forumdisplay.php?f=97)
-   -   Question on gauge cluster (http://www.bimmerfest.com/forums/showthread.php?t=227696)

Andye36 09-01-2007 05:53 PM

Question on gauge cluster
 
my tach is going kaput on my 325.
my question is will a m3 gauge cluster plug right up(same plugs on harness?), because i will most likely change to a s52 someday and i really see no need on getting another 325 gaugecluster(redline low). The second question is will the 325 ecu drive the tach just fine? or would i need a tach adaptor.
my car is a 09/92 325is 5speed.
thank you in advance,

Andy

PJBIMMER 09-01-2007 06:21 PM

It should work just fine......always match a six cyl. gauge cluster with a six cyl. Remember that a 4 cyl. cluster won't work on a 6 cyl. car.......PJ

DominguesE30 09-02-2007 04:42 AM

i dont know if it will work. It might but ive always been told to match up the clusters on the e30's orelse it will go haywire!
You can be our test tube. Pj may be right here thought..

Andye36 09-02-2007 08:45 AM

well the difference on 4cyls and 6's it the timing pulse is different, so a 4cyl tach would be at redline at like 3k on the engine.


All times are GMT -7. The time now is 05:10 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms