Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (http://www.bimmerfest.com/forums/index.php)
-   E36/7 Z3 (1996-2002) (http://www.bimmerfest.com/forums/forumdisplay.php?f=7)
-   -   Question for those with GC Rear Shock Mounts... (http://www.bimmerfest.com/forums/showthread.php?t=36690)

Ldogdotcom 07-30-2003 05:48 AM

Question for those with GC Rear Shock Mounts...
 
In the instructions that I got, there are two settings for the polyurethane bushing, "race" and "street." The question is this- what's the difference? For those who've been following my saga, I'm running revalved Bilsteins with the factory springs, the Ground Control rear shock mounts and TurnerMotorsport rear shock mount reinforcement plates. I'm not too sure which setting I'm going to set the RSM, basically because I don't know what the flipping over of the bushing does (I'm assuming it's sort-of-compliant versus stiff as hell). Thanks in advance!

in_d_haus 07-30-2003 06:51 AM

Quote:

Originally Posted by Ldogdotcom
In the instructions that I got, there are two settings for the polyurethane bushing, "race" and "street." The question is this- what's the difference? For those who've been following my saga, I'm running revalved Bilsteins with the factory springs, the Ground Control rear shock mounts and TurnerMotorsport rear shock mount reinforcement plates. I'm not too sure which setting I'm going to set the RSM, basically because I don't know what the flipping over of the bushing does (I'm assuming it's sort-of-compliant versus stiff as hell). Thanks in advance!

The street setting (nipples out) are slightly softer


All times are GMT -7. The time now is 03:42 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms