Replacing vanos filter and broke a white o-ring
I replaced my vanos filter and I broke a white small o-ring (next to a small black o-ring). Right now I installed the vanos filter kit with missing the white o-ring. Is it OK without it? I called a couple bmw auto parts and they don't sell it separately. Looks like I might have to replace a whole pressure limiting valve (part # 11367838080).
Or can I use another small black o-ring (11311318659) in place of that white o-ring; they are same size (10.82X1.78MM)? the space will fit both of the black o-rings. What do you think?
Here is a link to pressure limiting valve with filter and o-rings (No. 3,4,5,6) for ref.
This is the vanos filter kit I used. You will see the white o-ring in the video. I did post my question in here but realized the thread is moved.
Just received a new pressure limiting valve and turn out that white small o-ring/sleeve is supposed to be like that. Doh! Anyway, I used the new valve.
Photo of the valve
I was just about to order this part b/c I thought that I tore that small wght washer. Thank you for posting the info, and saving me some $$.
|All times are GMT -7. The time now is 03:17 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
© 2001-2015 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms