Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (
-   7 Series DIY (
-   -   Reference - Vehicle Data Status (Software Version History) (

rippjd 07-23-2011 05:59 PM

Reference - Vehicle Data Status (Software Version History)
1 Attachment(s)
SI B09 07 07 Programming/Coding Explanations - May 2011

Programming Version Vehicle Data Status


All affected vehicles have a Vehicle Data Status stored in the vehicle, e.g., E065-07-09-500. This Vehicle Data Status describes the current configuration of the vehicle, and is used for programming by ISTA/P.

To check the Vehicle Data Status against the ISTA/P version, refer to the attachment.

view PDF attachment B090707_ISTAP_Version_Data_Status.


rippjd 01-03-2017 05:30 AM

4 Attachment(s)
Attached is an updated file from mid 2016.

DIS v57 software will report your I-level as "UNKNOWN" or "UNBEKANNTE" if your integration level is newer than mid-2008, as it's missing the tables to reference newer I-levels. See below screenshot. The same can occur with Progman running on a SSS.

A version of ISTA that's newer than the version used to update your I-level will report an accurate I-level. Of course your local BMW Dealer can do this. Alternatively, there is a job in ToolSet32 that can report your I-level, assuming it's reference table is new enough.

745D 01-07-2017 06:09 AM

What does it mean if my vehicle data status is not in the list?

All times are GMT -7. The time now is 08:05 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
© 2001- VerticalScope Inc. All rights reserved.