Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (http://www.bimmerfest.com/forums/index.php)
-   E63 / E64 6 Series (2003 - 2013) (http://www.bimmerfest.com/forums/forumdisplay.php?f=114)
-   -   BMW Scanner Fault Code List Needed (http://www.bimmerfest.com/forums/showthread.php?t=576337)

bzeboymenz 10-20-2011 08:26 PM

BMW Scanner Fault Code List Needed
 
Hey Guys,

I have one of the 3 in 1 BMW Scanners + DASH that I recently bought.

My 2005 645Ci recently had the check engine light come on.

Can any of you kindly post the Fault code list that explain the codes listed below?



# Fault codes
----------------------------------------------------------------------------------------------------------------------------
ECU Fault type Code/Parameter (hex)
----------------------------------------------------------------------------------------------------------------------------
CAS -> IM messages 9304/68, 9906/28

LM -> IM message 930D/64

DME -> DTC 2EF4/E2

EGS_SMG -> IM message 4F86/38

SGMZ -> IM messages 9394/24, 9395/24, 9397/24, 9398/64

SGMS -> IM message 93F3/20

IHKA -> DTC 9C54/24

Yorgi 10-20-2011 08:54 PM

Could not find them all, but here is what my older document has matches for:

# Fault codes
----------------------------------------------------------------------------------------------------------------------------
ECU Fault type Code/Parameter (hex)
----------------------------------------------------------------------------------------------------------------------------
CAS -> IM messages 9304/68, 9906/28 - 0x22419906 9906 Coding,firing circuit,knee airbag,front right(E85),or head airbag,right(E6x),at variance

LM -> IM message 930D/64

DME -> DTC 2EF4/E2 - 0x016A2EF4 2EF4 Map thermostat, mechanism

EGS_SMG -> IM message 4F86/38 - no 4F86 but before and after it = 0x02614F85 4F85 Ratio monitoring, clutch E and 0x02614F87 4F87 Ratio monitoring, gearshift 1 - 2

SGMZ -> IM messages 9394/24, 9395/24, 9397/24, 9398/64

SGMS -> IM message 93F3/20 - 0x244193F3 93F3 Key switch,passenger airbag:coding data fault

IHKA -> DTC 9C54/24 - 0x05619C54 9C54 AUC sensor

bzeboymenz 10-20-2011 09:01 PM

Thanks, Yorgi!!

Blaknificent 01-23-2013 07:51 AM

Hey Yorgi,

Happy New Year to you.

I recently had valve gaskets and upper/lower timing gaskets changed....somehow during the 3 day DIY, my batt went dead which required a jumpstart.

Lo and behold, a code appeared out of nowhere...."passenger airbag restraint, tension, fault".....

Never had ANY problems before and this is my first time seeing this code.

Ever heard of this?

Can it be reset/cleared?

I know this forum keeps you busy, but I would appreciate your knowledge and wisdom on this one.

Thank you in advance.

HerbP 01-23-2013 04:53 PM

This code comes up often with a weak battery. You should be able to clear it with a good battery, with a full charge. Mine only cleared with a new battery, with a full 12 hour charge. The new battery off the shelf would not clear the code. I was glad to see it clear after putting a fresh charge on it.

Good Luck!


All times are GMT -7. The time now is 01:17 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms