Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (http://www.bimmerfest.com/forums/index.php)
-   E89 Z4 (2009 - current) (http://www.bimmerfest.com/forums/forumdisplay.php?f=145)
-   -   Ordering Storage Compartment (http://www.bimmerfest.com/forums/showthread.php?t=595084)

GaryRudolph 01-18-2012 05:00 PM

Ordering Storage Compartment
 
When ordering the storage compartment, any idea if you can just order the tray or if you also need the shelves?
http://realoem.com/bmw/showparts.do?...08&hg=52&fg=10

ChuckE89 01-30-2012 02:22 PM

Mine came with the three shelves [Part # 2], as i already had the pass-through storage option.

airmel 05-26-2012 11:56 AM

I'm also interested in the Storage Package compartment/shelves for my Z4. It has the pass-through storage option.

Have you ordered parts and upgraded yours yet?

645/333 05-26-2012 02:25 PM

If your cars came with the pass through loading for ski's then you should have the other fitments as part of the kit. I removed my ski kit and used the available kit to put the shelves back in, needed this type of storage as I don't ski.......without the shelves it is just a big hole...plus you also need a new back panel in the boot/trunk...

NV blue Z 05-26-2012 04:29 PM

2 Attachment(s)
Funny...mine came with the pass-thru (with the bag for skis installed), and the storage compartment but only with one shelf. I didn't know there was supposed to be three.

I don't want to hijack the thread but it also had some sort of slightly curved plastic thing in the trunk that I can't figure out what it's for. Anyone have any idea what this is for?
Thanks.

AndyM 05-26-2012 04:48 PM

Quote:

Originally Posted by NV blue Z (Post 6858710)
I don't want to hijack the thread but it also had some sort of slightly curved plastic thing in the trunk that I can't figure out what it's for. Anyone have any idea what this is for?
Thanks.

Looks like the front license plate mount.

NV blue Z 05-26-2012 05:11 PM

Quote:

Originally Posted by AndyM (Post 6858738)
Looks like the front license plate mount.

Ah. Thank you.
That didn't even cross my mind.
Nevada doesn't require a front plate if the car doesn't come with a mount from the factory, so I don't have a front plate installed. :)

airmel 05-28-2012 01:20 AM

Quote:

Originally Posted by 645/333 (Post 6858601)
If your cars came with the pass through loading for ski's then you should have the other fitments as part of the kit. I removed my ski kit and used the available kit to put the shelves back in, needed this type of storage as I don't ski.......without the shelves it is just a big hole...plus you also need a new back panel in the boot/trunk...

Well as a matter of fact, all newer E89's come with the pass through loading system (skis) but don't come with the storage compartment unless the car is also equipped with the Cold Weather Package.

So... back to my original question, has anyone ordered and installed the Storage Compartment Package kit/parts, etc?

645/333 05-29-2012 03:03 PM

Perhaps you should just go to your local BMW dealer parts department and ask!!!

airmel 05-29-2012 03:42 PM

Quote:

Originally Posted by 645/333 (Post 6863752)
Perhaps you should just go to your local BMW dealer parts department and ask!!!

A while back, I spoke with a couple of BMW parts guys about the P/N's shown on realoem.com and got three opinions, so I figured I would ask around here if anyone had actually ordered the stuff. Apparently nobody has.

My order should be here in a couple of weeks (coming from Germany) so will report back at that time.

airmel 06-15-2012 04:27 PM

As I mentioned previously, my 2012 35i was equipped with the Pass Through Loading system and I wanted to obtain the Storage Compartment shelf gizmo to install in its place.

Well today Riverside BMW called to tell me that my special order parts were in (they took 11 days to get here from Germany). Based on what I had been told by several BMW parts guys previously, I had ordered the oddments tray and three shelves.

Today when I picked up my parts, I found that you only have to order the "Oddments Tray" BMW P/N 52-20-9-181-610. This part comes with the snap in vertical bulkhead and a set of three shelves.

My total cost was $62.95 for the Oddments Tray. I didn't need the extra shelves and was not charged for them.


All times are GMT -7. The time now is 07:58 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms