Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (http://www.bimmerfest.com/forums/index.php)
-   7 Series - E65 / E66 (2002 - 2008) (http://www.bimmerfest.com/forums/forumdisplay.php?f=126)
-   -   Bmw 750 fog light hid? (http://www.bimmerfest.com/forums/showthread.php?t=598992)

dsaautocustomz 02-05-2012 04:21 PM

Bmw 750 fog light hid?
 
Whats up new to the forums anyways just installed my hid kit on my 07 750 for my fog lights. Here the problem when the car is in accessories mode the lights work fine, but when the car is started after 10 secs one light goes off then the other will one will go off. After all that the idrive message shows with light malfunction. Also when fog light button is pressed the idrive gets static. Please quick help is needed.

MakaveliFaison 02-05-2012 06:44 PM

Once car is cranked it is checking your bulbs and not liking what it sees.

Need to get these lines in your lma changed to nicht_aktiv in ncs expert.

Warmueberwachung_nsl_l
warmueberwachung_nsl_r

dsaautocustomz 02-05-2012 06:48 PM

How do you do that

1bad540 02-05-2012 08:38 PM

just get the 15.00 resistors and youll be fine.

Gene1986 01-30-2013 09:40 AM

Have same problem at times what's the resistor where can I get it and where do I put it

dsaautocustomz 01-30-2013 09:42 AM

Just go to ddmtunning.com and get their error code relay

Sent from my SCH-I605 using Bimmer App

mrbmwx5 01-30-2013 01:08 PM

$5 capacitor from radio shack work just fine.

E92-Lighting 02-01-2013 01:10 PM

Quote:

Originally Posted by mrbmwx5 (Post 7348722)
$5 capacitor from radio shack work just fine.

+1. either way is fine

Gene1986 02-01-2013 05:11 PM

Where do I put the resistor. I'm confused?

Ricardo21 02-01-2013 09:42 PM

Hello

Gene1986 02-15-2013 09:13 AM

Hid flickering help!

First_745Li 02-15-2013 09:38 AM

1 Attachment(s)
Quote:

Originally Posted by Gene1986 (Post 7382873)
Hid flickering help!

Two ways to do this,

1. (preferred method) Get the resistor packs similar to these
http://www.ledssuperbright.com/2-pcs...FQTqnAodVVcAvw

2. Go to Radio Shack, buy the capacitor 4700 uF/35V or 2200 uF will work.
When installing, notice the ARROW on the capacitor. Arrow should be connected to the "negative' black wire and the other end to the RED wire. This connection is between the power source and ballast.


All times are GMT -7. The time now is 07:08 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms