Is Bosch stage 3 injectors,Cosmo down pipe,stock exhaust, a good combination
I have the following parts but have not installed them because I'm not sure if it's a good combination or if I will need to change other parts so that everything works smooth
Any problems I might run into or parts that I would need to buy
Bosch stage3 injectirs
Cosmo cold air intake
Woul this flow correctly
Would a new maf be in order
Any tips would be appreciated
Also interested, anyone have idea?
I used a 4" O.D. Barrel, Cut the MAF stem off the OEM stock MAF, Epoxy`d the stem onto the Custom 4" barrel, Inserted the MAf Sensor, Installed Dinan bored out throttle body, M60(1995 e38) Larger runners Manifold, Dinan Free flow exhaust and its FLows likie a BAdd ass but you need 1 special thing....SOFTWARE!!!
I ihad to use Stage 5 Dinan Software to make it run right ($899)
|All times are GMT -7. The time now is 08:02 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
© 2001-2015 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms