Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (
-   6 Series DIY (
-   -   DIY Ram Air Scoop (

sweepy1026 06-17-2012 09:51 PM

DIY Ram Air Scoop
I spent two days and around $65 to finish my custom scoop (made by aluminum sheet). Which is bigger than RPI and I think is better than the RPI one.
compare to

Check the bottom right corner, mine design is trying to make the air won't rebound back. I hope my theory is correct. LOL

aluminum sheet: $25 at lowes
aluminum primer + red spray paint $15 home depot
aluminum sheet cutter or scissor $15
screws around $5-10

O...and I made the block off plate too but I forgot to take some photo of it. And anyone know if the E63 M6 need two block off plate? Because I find out the passenger side air box have that hole too.

kickboxin 06-25-2012 08:41 PM

So are you going to start mass producing these?

sweepy1026 06-25-2012 08:58 PM


Originally Posted by kickboxin (Post 6916889)
So are you going to start mass producing these?

Haha, no, but if you want the scale I can PM you.

TopDownInFL 06-30-2012 12:59 PM

Really nice work!

sweepy1026 06-30-2012 01:57 PM


Originally Posted by TopDownInFL (Post 6927184)
Really nice work!


tieros 07-29-2012 11:57 AM

Those look a thousand times better than the RPI ones. My passenger side RPI one wouldn't stay attached so I removed it, and the driver side one was rattling. Congrats on a great DIY mod!

Can you PM or post the plans? I'd love to replace the RPI driver side and re-add the passenger side :-)

babyboss 09-14-2012 01:33 PM

RPI a bunch a rip off's ..
sent me wrong order & to date NO REPLY/RESPONSE ****

Mattserati 11-06-2012 05:01 PM

Is it possible to get the dimensions for this mod from you? Also, have you noticed any great difference since installing?

All times are GMT -7. The time now is 10:10 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
© 2001- VerticalScope Inc. All rights reserved.