Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (http://www.bimmerfest.com/forums/index.php)
-   7 Series DIY (http://www.bimmerfest.com/forums/forumdisplay.php?f=138)
-   -   Here are logic 7 repair instructions for every 1 (http://www.bimmerfest.com/forums/showthread.php?t=629488)

PAPER 06-26-2012 01:11 AM

Here are logic 7 repair instructions for every 1
 
5 Attachment(s)
OK I AM NoT TAKING ANY CREDIT FOR THIS .
I FOUND IT WHILE READING ON A GERMAN FORUM .

HERE IS A COPY & PASTE OF THERE INSTRUCTIONS WITH PIC'S
DO AT YOUR OWN RISK !!!



Repair instructions and ASK Logik7 from the E65!
Good day,

as you all know I am going to repair a defective Logik7.
I just wanted to show my work and presentieren because of the many questions that I'm not yet as far : Thumbsup:
Come rare in the hobby room at my in-laws.

Picture # 1: Here's the Logik7 board, you see four stages
1x Center speaker
1x both rear doors
1x bass left
1x bass right
Picture # 2: I've removed the old broken amplifiers and exposed contacts.
Image No. 3: The same close-up
Picture # 4: These two stages are to replace the old
Picture # 5: I was looking something Sprittig ;-)) do not have hands trembled, but I did not want to hide from you!

I
I also soldered the amp already part way to the board (or
no photo), for the speakers I have 0.5 mm thick and 3cm long lines used for
the signals of the thin black? mm .

Will keep you here with that Fred up to date.

mfg odd ....

Edit of 19/03/2012: As I already wrote yesterday, I was
sprittig something and so I said instead of 0.5mm , 1.5mm to
the TDA soldered ;-( (Now I know why it was so hard * LOL *

This will, of course, correct and add new pictures!

PAPER 06-26-2012 01:13 AM

2 Attachment(s)
THIS IS HIS 2'ND POST


So

I was now again in the basement and I studied the board.

If you want to use an external amplifier, for which I have marked the low-frequency signal.

If you simply want to repair his Logik7 that will please the TDA1562 as specified soldered to the motherboard.



TDA1562 datasheet: Page 3
http://translate.googleusercontent.c...DCfVr9q-GX5M0g


I assume no warranty, all work is done at your own risk!


Who is a benefit sional repair wants, which is aimed to please the user: "King.reparatur" from the other forum!

I feel the effort is too great and I do not want to operate commercial is.

I only went about creating it and prove that a repair is possible in our Logik7


ALL REQUESTS FOR JOY WHEN REPAIR

FIG 1: Instructions

FIGURE 2: it should look like it! (Thermal grease and do not forget to drill)

mfg odd ....

More to follow ....... O lines





I hereby publicly thank you for the user from the Russian dj0vitamin BMW forum ( www.bmwclub.ru ), who has developed a similar guide own un told me his knowledge

PAPER 06-26-2012 01:16 AM

3 Attachment(s)
HIS 3'RD POST



I have now a new pair of images from a user.

Have now labeled this.

So much fun with it : Thumbsup:

HP. Here you can see how difficult it is to enfernen the old amps without damaging the contacts

PAPER 06-26-2012 01:20 AM

4'TH & LAST POST


http://www.reichelt.de/index.html; ACTIO 7d09cd0be611e9a ...?


The connections are labeled with base, emitter, collector (abbreviated diagram by the letters B, E, K)

english or B, E, C!

PAPER 06-26-2012 01:25 AM

Important: Do not forget before discharging the capacitors. With a light bulb or a resistor.

Way to prevent it before it transmits when soldering

dude_hot10 06-26-2012 03:15 AM

thanks

dgoodsell 06-26-2012 06:01 AM

Nice find paper....someone needs to be the guinea pig and let us know how it goes.

Rookie2008 06-26-2012 10:51 AM

Excellent find bro!

PAPER 06-26-2012 12:10 PM

WoW , considering all the amp problems .
I thought people would be all over this topic .

132 views & only 3 replys
Sent from my GT-N7000 using Bimmer App

pass427 06-26-2012 12:36 PM

Quote:

Originally Posted by PAPER (Post 6918207)
WoW , considering all the amp problems .
I thought people would be all over this topic .

132 views & only 3 replys
Sent from my GT-N7000 using Bimmer App

That's because I have no clue what was written but I will take it to my electronics guy and I am quite sure he can decipher it. It funny as I just received my Logic 7 amp in the mail today after sending it out for repair. It it works then that will save me on future repairs

mrbmwx5 06-26-2012 01:07 PM

I just checked around and seem like no one have them chips...
http://www.arrownac.com/parts/descri...in-dbs17p-tube

PAPER 06-26-2012 07:42 PM

All I can tell you is keep looking , they are available & Google search is your friend

Sent from my GT-N7000 using Bimmer App

II Kings 9:20 06-26-2012 07:51 PM

Nice find. I did a similar repair to my SID (Saab Info Display) albeit way less complex. I hope I never need this info but nice to know it is out there. I hope mine lasts since it is not on the CPO dime.

pepe65 06-26-2012 07:56 PM

dont know what 96% of any of that means but i sure wish i did.

PAPER 06-26-2012 08:39 PM

Quote:

Originally Posted by pepe65 (Post 6919272)
dont know what 96% of any of that means but i sure wish i did.

basically it's instructions on which chip to remove from
the logic 7 , & which chip to replace it with .
Also the soldering points are given .

GregHolla8 06-27-2012 03:25 AM

I did some research the BEK transistor KT3107 it's Russian
TDA8564 and TDA1562 u could find them all on eBay

spyders 745li 06-27-2012 04:25 AM

Nice find. Just sent mine off to Becker for repair. Now we have instructions on the repair. Very good find

Sent from my R800at using Bimmer App

GregHolla8 06-27-2012 05:31 AM

I bought all the caps all the transistor all amplifiers can't wait to get back to NYC to dive on this put the marine corps electronics knowledge to work

second 7 06-27-2012 06:44 AM

Yes , I seem to have ran into that same wall. A company on the away coast just informed me that they can't locate a chip that is needed . I believe Paper is onto something. Must investigate into it further. Mean while no sounds ! :mad:

Sent from my PC36100 using Bimmer App

PAPER 06-27-2012 12:02 PM

I think you mean the WEST coast .
& as for the chips , they are available .
Just use Google search or buy them on Ebay

Sent from my GT-N7000 using Bimmer App

PAPER 06-27-2012 12:04 PM

Also you guys might want to bookmark
This topic before it gets barried .
After all this topic ain't stickied
Sent from my GT-N7000 using Bimmer App

second 7 06-27-2012 03:01 PM

This is some crazy info. I wish I really knew what to do with it. The shop on the west coast has yet to tell me what chip it was that they couldn't get but i would think just like I found it in eBay and the site you posted I would think by them being a big company. However if I need to get the oart and get it to them Ao be it. I may need that unit if its still availabe. I'm 3 ask units in the hole. Lol

skybmray 06-27-2012 10:16 PM

Great find, I will be definately ordering the chips as my drivers side bass seems to crackle a lot.

PAPER 06-29-2012 10:30 PM

Bump

PAPER 07-03-2012 09:21 PM

Bump


All times are GMT -7. The time now is 03:02 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms