Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (
-   E24 (1976 - 1989) (
-   -   Parting out whole 1984 US 633csi + 5 speed conversion kit (

Stupid Kid 07-12-2012 06:49 PM

Parting out whole 1984 US 633csi + 5 speed conversion kit
Parting out whole 1984 US 633csi + 5 speed conversion kit
Hi all, I put an ad in the parts car section and I haven't gotten any inquires.

Seeing the number of WTB posts in this section I figure I might be able to help a some fellow enthusiasts out

This is a COMPLETE e24, was running and driving when parked. It is an US market arktisblau manual with 190k on the clock.

The interior is tan and in fairly rough shape, the front seats and dash are very cracked. Most of the electronics, however, work and all switches and plastic pieces are present. The body, with the exception of the passenger side rear quarter and drivers door is straight with no filler. The paint is bad so you will have to repaint any body panels. The grilles and trim are present, and the car has a full 8:1 m30b34 and complete drive train and suspension.

When I get the time, I will pull all the necessary components for a manual swap, couple it with a metric mechanic rebuilt getrag 260/5 5 speed, and sell it as a complete manual swap kit. This transmission swap is very desirable for a bmw of this era and would be perfect in an e23, e24, or e28. Metric mechanic is renowned for the quality of their work and this transmission is superior to a normal 260 in both performance and reliability. Also included are brand new transmission mounts and a brand new clutch plate. If you are interested in this message me and I can pull the components and have them ready for you in a very timely manner.

As stated before, this is a complete e24. Prices for parts will be agreed mutually and I will look up what the particular item commonly goes for as a baseline. I can send pictures and test all items to verify that they are functional (if possible). If you have any questions about the availability of a part i encourage you to pm me. I would like to think that I am a fairly good person to work with. I am located in Austin, Texas and will give discounts for local pickup.

Items available include:
All body panels
Fully functional motorized mirrors
Exterior trim items (grilles, side moldings, door handles, ect.)
Lights (headlights, tails, side markers, ect)
US bumpers.
All parts from an 8:1 m30b34
All interior switches.
Pre airbag steering wheel.
Fully functional gauge cluster.
Seat motors.
All interior trim, door handles, plastic pieces.
Window regulators.
All glass in the car is crack and chip free.
Suspension components.
Rear bucket seats are in fair condition.
Fuel pump works great.
Everything else.

As stated this is a full car, so I have everything. Thank you for looking, and good luck with your bmw

R2dmax 07-30-2012 01:03 PM

The suspension, is it OEM, or upgraded? CAn you send pics of the car? this sounds like mine exactly.. What about seats? Feel free to email directly rlreynoldsjr @ yahoo dot com

R2dmax 08-10-2012 10:05 AM

Any more info? Still interested

sam@2995 08-14-2012 10:44 AM

1984 633csi whole car
Please provide your contact phone number so we can talk directly. Sam
678-576-2191 Cell

R2dmax 08-14-2012 01:07 PM

PM Sent

Stupid Kid 08-28-2012 06:54 PM


Originally Posted by R2dmax (Post 7010243)
PM Sent

I tried emailing you at that address but got a unable to send message from my provider, gmail.

The email I was attempting to sent read

Originally Posted by me
Hi, thanks for your interest.
Unfortunately the suspension has been, if anything, downgraded, it's got generic springs and some oem "replacement" shocks that are pretty worn. however, I can definitely provide non wear suspension components. As far as the seats go, the leather is trashed on the fronts but the back buckets are good, If you are interested in them. I believe that all of the motors on the passenger seat work with the exception of the headrest (of course), I think the drivers seat is in similar order but Its been pulled from the car and is sitting in the garage. If you are interested in pictures just let me know of the specific parts you are interested in and I can send you high quality dslr pictures of them. The car as a whole is pretty torn down by this point and isn't much to look at.

Thank you.

Anyways, I am not very active on this is and there does not seem to be a ton of interest either from people on here, so if anyone has any inquires the best way to contact me will be to email me at

markpoleon 12-30-2012 04:05 AM

I'm interested in the gauge cluster.

Can you please let me know how much you want for it and if possible, can you show me photos?


hornhospital 12-30-2012 08:23 AM

His last posting was 4 months ago, he said himself that he is not active on this forum, and the best way to contact him is by email at :

I would strongly suggest sending him an email and not wait for a reply here that may never come.

All times are GMT -7. The time now is 12:45 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
© 2001-2015 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms