Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (http://www.bimmerfest.com/forums/index.php)
-   X5 E53 (1999 - 2006) (http://www.bimmerfest.com/forums/forumdisplay.php?f=22)
-   -   Grinding sound on sharp turns (moderate speed) (http://www.bimmerfest.com/forums/showthread.php?t=636841)

kiao 08-02-2012 09:41 AM

Grinding sound on sharp turns (moderate speed)
 
When driving my X5 (2004; 67K; 4.4i) and taking sharp (90-180 degree) right turns at moderate speed there is a grinding sound. It sounds like it is coming from the right wheel area. The noise doesnt occur on gradual turns or sharp turns at very slow speeds.

Anyone have any ideas??

DirtyDan 08-03-2012 01:14 PM

Check the outer CV boot. it could be torn. The bearings are gum ball size that fit into a nuckle. Just my thoughts since I just replaced my passenger side half shaft that came with new CV boots ready to go. It runs smooth now and no shake on the highway.

CJones 12-02-2012 11:09 AM

check the wheel bearing before going more expensive
 
Had similar issue on previous X5 2001, changed bearing and problem gone

1bad540 12-03-2012 06:56 PM

Boot ripped axle gone.


All times are GMT -7. The time now is 06:16 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms