2013 F10 psdzdata
 

I am getting a new F10 in the next couple of weeks build date of 7/12 (ship is on the way). Will I be able to use the current psdzdata out there to code or will I need to wait for the next files to be out there? This is a cool thing to be able to do to our BMWs. Individual BMW - you bet this is better!:thumbup:

You will most likely need newer 47.x PSdZdata. Hopefully though we will have it before your car arrives.

Yes it should work with your 2013 X3. Data files 47.x are not available, 46.6 was released but it went into a controversy if it's the right and complete set. We don't want to work with half cooked files.

Don't worry all should go smoothly.

:mad:half cooked files:mad:
These Files were the newest this Time!

"Data files 47.x are not available"
These Data Files are available, I have it here but not for a half cooked April1!:thumbup:

Bummel is correct. The 46.6 Data files were perfectly legitimate and good. Nothing wrong with them. I was incorrect with my initial assessment. :ouch:

But now I skip 47.1 and wait for 47.4.
: popcorn:

Any update on the 47.x files yet? I think I may get the car this weekend!:beerchug:

When you have your car, cable and E-Sys, PM me. I'll make sure you have the PSdZData you need. :thumbup:

Dear Shawnsheridan.

I´m from Germany and BMW updated my F10 to a new Version. (My Junction Box is crashed, BMW changed it and programmed the Car. Now i need a PSDZdata with the CAF File CAFD_000000F9_007_003_111. Have you a copy from this one?

Greetings

Hagbrain

I sent you a PM with the D/L Link.

Understand though that most times, you can use the newer CAFD files in your old PSdZData installation, but not always. Sometimes the newer CAFD files also have dependencies on other newer files (.jar, .dll, etc.). I am seeing the latter with the newer v.47.4 CAFD files.

If you get a "cdDeploy ProcessedWithError", you definitely need the full PSdZData package.

Gentlemen,
awful job you are doing here !!!

I'll geht my 07/12 F11 next friday and cannot wait to drive it.
Now I was obviously way too quick with my preparations:
I created the cable, downloaded 3.18 but found now in the posts that 46.3 is far too old for my new dream.
Anyone who could help, I really would appreciate it. Im mainly interested in VIM and closing trunk by the internal button.
Thanks in advance !!!

Moin,

ich kann Dir helfen!
Wir müssen das aber über PM machen!
Was hast Du Dir für einen bestellt?

Bummel

I have a 2013 F10 that I tried coding this weekend using the 2_46.6 psdzdata package and it doesn't appear to be valid for the 2013's. Many of the CAFD were not valid for the modules. The only modules that I could successfully code were the HKFM, PDC and TRSVC. Some modules such as HU_CIC were not even present in my car (I am assuming that this is due to the next generation navigation system).

Is is possible to get a copy of the 47.4 psdzdata package?

Thanks,

Adam

So you have the Next Gen Nav? Do you have HU_H ECU or something like that, HU_x?

I do have the next gen nav. Instead of HU_CIC module, I have HU_NBT. I attached a screenprint showing all of the modules that I have.

Adam

Sweet! PM Sent with D/L Links.

Awesome, Thanks! I'll start downloading it and will try it again once all of the downloads have completed...

Good news! The 47.4 psdzdata set works with all of the modules other than CAS. I forgot to write down the error message, but I'll try again tomorrow. I was able to code quite a few things in the HU_NBT module too!

Let me know what the CAS Error Code is when and if you see it again.

Please let me have 47.4 psdzdata~ I got program updated on my F10 and coding doesn't work anymore..T_T

PM Sent with D/L Links.

Did you have an read Error? File not found?

Bummel

I believe that it was a file not found error, but I will verify this evening.

I confirmed that it was a file not found error for the cafd_0000000f-005_024_221 file. Full error is attached.

Adam

Oh boy. Did I send you 47.1 instead of 47.4?

I think you sent me 47.4, at least the files all had 47.4 in the title so I am assuming they were right.