Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (http://www.bimmerfest.com/forums/index.php)
-   E21 (1975 - 1983) (http://www.bimmerfest.com/forums/forumdisplay.php?f=133)
-   -   '83 320i Lower Suspension Arm (http://www.bimmerfest.com/forums/showthread.php?t=643994)

gfmendoza1 09-05-2012 06:38 PM

'83 320i Lower Suspension Arm
 
I have just finished replacing the lower suspension arm since the bushing were gone. I cannot get the arm to align with the hole on the crossmember to complete the reattachment. Any ideas??

BMWFatherFigure 09-15-2012 03:06 PM

If this is the last bolt to go in and the only part left then undo everything and START with is bolt. Leave everything slack until reassembled and final tighten with weight back on the wheel. (Must admit its not a job I have done).

gfmendoza1 09-15-2012 07:50 PM

Thanks for the help. I managed to insert the bolt after leveraging the assembly just enough to slide the bolt in (with a few taps.) The other side was easier.

DHoang 10-03-2012 07:28 AM

dude you from austin? w/ an e21 too? man, that's rare!


All times are GMT -7. The time now is 04:58 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms