Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (
-   BMW Coding and Programming (
-   -   F10 HU_CIC version related error (

ujkong 09-14-2012 01:25 AM

HU_CIC version related error
Dear all,

Good to see you guys, i am Kong from Korea.

I have done several coding for my 520d with 46.3 psdz.

Recently I have updated my car from BMW service center, also I have downloaded 47.4 psdz file, and I tried coding just before.

Most of coding, I succeeded, except HU_CIC parameter related coding.

Basically I can not read HU_CIC data, and the error shows that,

"I need cafd_000000f9_007_003_067"

I searched my 46.3 and 47.4 psdz, and in any data I could not find the above version...

Is there anyone who has similar problem? or who can solve the problem?

332701 09-14-2012 07:19 AM

Exactly the same here. Everything went fine except HU_CIC after having the car updated today to 47.x. I work with E-Sys 3.18.4

332701 09-14-2012 09:14 AM

ujkong, here I just learnt that my car has F010-12-07-533 = ISTA/P 2.47.5 on it, (must be the same at yours) but available for download is just 47.4. This means we must wait...

ujkong 09-14-2012 09:42 PM

Thanks a lot!
Thank you~~

I just saw you and Shawn discussion in other thread.

So we need to wait until next version released...

Bummel 09-16-2012 07:18 AM

Check your PM!

shawnsheridan 09-16-2012 10:17 AM


Originally Posted by Bummel (Post 7077063)
Check your PM!


webb 09-16-2012 08:03 PM

Because two files are waiting, too. 007_003_067 and 007_002_157

shawnsheridan 09-16-2012 08:39 PM


Originally Posted by webb (Post 7078100)
Because two files are waiting, too. 007_003_067 and 007_002_157

cafd_000000f9.caf.007_003_067 is in the new 47.5 PSdZData that we should have soon.

However, if you are waiting on cafd_000000f9.caf.007_002_157, that is NEVER coming. I have written about this before, but essentially it is some sort of oddball CAFD, a mistake if you will, that showed up on a few cars built sometime between March and May, and has never appeared in any PSdZData release since then. The only option is to have an affected car programmed with the latest ISTA/P or selectively flash the CIC with newer firmware.

All times are GMT -7. The time now is 12:43 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
© 2001-2015 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms