Z4 M on SSR Professor SP1
 

Here are the pictures from a recent photoshoot we had done on a Z4 M on 18" SSR Professor SP1s in Gun Metal

Pictures taken by J. Zhang from 1013mm

Gallery post here Enjoy! :thumbup:

http://ssr-wheels.com/gallery/image....2fDSC_4632.jpg

http://ssr-wheels.com/gallery/image....2fDSC_4641.jpg

http://ssr-wheels.com/gallery/image....2fDSC_4643.jpg

http://ssr-wheels.com/gallery/image....fDSC_46462.jpg

http://ssr-wheels.com/gallery/image....2fDSC_4635.jpg

Beautiful! Love the wheels (especially the dish on the rears), the red wheel nuts, the chrome valve stems, the black M badges, the blacked-out grills, the lowered suspension and the (RPI?) exhaust tips. Really nicely put together. I wish we could see a raw photo without photoshopping though..... but I guess that would ruin the good work of the photoshopper. :)

A great new angle on our cars. Thanks for sharing!!

Thanks for the kind words! The raw images wouldn't be very helpful since it was so dark out. But here's a shot from a camera during the shoot.

https://sphotos-b.xx.fbcdn.net/hphot...56260298_n.jpg

What about this one with SSR Type F Euro with some stick Hoosiers on it?

http://i.imgur.com/sTEpT.jpg
http://i.imgur.com/1lfSv.jpg?1

I ordered some black ///M badges from a vendor on eBay and they're roughly the same height but a little longer (wider). I've installed blacked out grilles and have considered using these badges to replace the rear and side fender badges because I like the blacked out look. On the other hand, I'm still kind of a purist and don't really want to remove the original ///M badges because I want to retain the original (classic) look. The original grilles can easily be put back on, the ///M badges not so easily. Still deciding...

http://i.ebayimg.com/t/BMW-MATTE-BLA...B!g~~60_12.JPG

That car is gorgeous.