Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (http://www.bimmerfest.com/forums/index.php)
-   E36 (1991 - 1999) (http://www.bimmerfest.com/forums/forumdisplay.php?f=97)
-   -   helpppppp (http://www.bimmerfest.com/forums/showthread.php?t=649870)

chillwill13555 10-04-2012 12:54 PM

helpppppp
 
ok so my tranz went on me and the mechanic said that the drive shaft was gone to and the flex disk .so im wondering i have a 325i 2dr convertable and i have a guy thats selling me a 92 325i sedan both are automatic can i use his tranz and drive shaft as well on my car :dunno::mad: can any body helpppppppppp meeeeeee much appreciated

jonesin 10-04-2012 01:01 PM

1 Attachment(s)
Quote:

Originally Posted by chillwill13555 (Post 7113653)
ok so my tranz went on me and the mechanic said that the drive shaft was gone to and the flex disk .so im wondering i have a 325i 2dr convertable and i have a guy thats selling me a 92 325i sedan both are automatic can i use his tranz and drive shaft as well on my car :dunno::mad: can any body helpppppppppp meeeeeee much appreciated

?

jonesin 10-04-2012 01:07 PM

M***601;n siz***601; dem***601;k üçün çal***305;***351;***305;r***305;q n***601; t***601;rcüm***601; ç***601;tinlik ya***351;***305;yorum. Maksimum s***601;m***601;r***601;liliyinin üçün klaviatura istifad***601; etm***601;k üçün zaman ay***305;r***305;n.

***25105;***26377;***22256;***38590;***30340;***19 996;***35199;***20320;***24819;***35828;***30340;* **12290;***35831;***33457;***26102;***38388;***210 33;***29992;***24744;***30340;***38190;***30424;** *26368;***22823;***30340;***25928;***30410;***1229 0;

Ik heb problemen met het vertalen van wat je probeert te zeggen. Neem de tijd om uw toetsenbord te gebruiken voor maximale effectiviteit.

***904;***967;***969; ***948;***965;***963;***954;***959;***955;***943;* **945; ***963;***964;***951; ***956;***949;***964;***940;***966;***961;***945;* **963;***951; ***945;***965;***964;***972; ***960;***959;***965; ***960;***961;***959;***963;***960;***945;***952;* **974; ***957;***945; ***960;***969;. ***928;***945;***961;***945;***954;***945;***955;* **974; ***960;***940;***961;***964;***949; ***964;***959; ***967;***961;***972;***957;***959; ***957;***945; ***967;***961;***951;***963;***953;***956;***959;* **960;***959;***953;***959;***973;***957; ***964;***959; ***960;***955;***951;***954;***964;***961;***959;* **955;***972;***947;***953;***972; ***963;***945;***962; ***947;***953;***945; ***956;***941;***947;***953;***963;***964;***951; ***945;***960;***959;***964;***949;***955;***949;* **963;***956;***945;***964;***953;***954;***972;** *964;***951;***964;***945;.

Ich habe Schwierigkeiten, etwas zu sagen. Bitte nehmen Sie sich die Zeit, um die Vorteile der größten Vorteile der Tastatur zu nehmen.

***22522;***22320;***12399;***12377;***12409;***12 390;***25105;***12293;***12398;***12418;***12398;* **12384;***12290;

jonesin 10-04-2012 01:08 PM

Hmm...


It would seem that some characters are not recognized. Much like your post.

ZeGerman 10-04-2012 01:12 PM

It will work, but you'll want to verify that the donor parts aren't also shot. In addition to getting a new flex disc, you will need to buy a new center support bearing.

chillwill13555 10-05-2012 12:04 AM

thanks zegerman i will buy the flex disk and center support bearings

josephroberts75 11-27-2012 06:29 AM

mesure it from flange to flange

TheFinanceGuy 11-27-2012 06:36 AM

Quote:

Originally Posted by josephroberts75 (Post 7216385)
mesure it from flange to flange

Oops old post. Yikes!

chillwill13555 12-03-2012 09:10 PM

lol its ok the finance guy


All times are GMT -7. The time now is 05:19 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms